MicroPower Direct's safety-approved 1W SIP DC/DC converters tout low costs

Date
06/12/2015

Categories:
DC-DC Converters, Embedded Systems, Power Modules, Power Supplies

 PDF

The ME100SE family is packaged in a miniature, 4-pin SIP case that requires very little board space

Available immediately from MicroPower Direct, the ME100SE series provides 1W of output power in a miniature 4-pin SIP package. They are specifically designed to provide the wide selection, miniature size, I/O isolation and economy required by a wide range of space critical board level applications.

Sixteen models operate from 3.3, 5, 12, 15 and 24 VDC inputs, providing single outputs of 5, 9, 12, 15 or 24 VDC. Standard features include efficiency as high as 82%, 1,500 VDC input/output isolation, continuous short circuit protection and low noise operation. The ME100SE series is approved to EN 60950 and the MTBF (per MIL HDBK 217F) is greater than 3.5 Mhours.

The ME100SE family is packaged in a miniature, 4-pin SIP case that requires very little board space. The pin-out is industry standard and all case materials meet UL94-V0 requirements. Each model is specified for operation over the wide operating temperature range of -40°C to +105°C with no heat sinking required. Cooling is by free-air convection.

The ME100SE series is an ideal solution for a wide variety of board level power distribution applications requiring miniature size, robust performance, and low cost.

MicroPower Direct

Related articles

 Atomically Precise Models Improve Fuel Cell Understanding
 Research Shows Black Plastics Could Create Renewable Energy
 High-Performance Sodium Ion Batteries Using Copper Sulfide