TDK-EPC Corporation's Film capacitors: High dielectric strength for wind power plants



TDK-EPC, a group company of TDK Corporation, presents new EPCOS power capacitors with higher rated voltages from 550 VRMS AC up to 1000 VRMS AC. The MKP AC HP B25360* series covers a capacitance range from 10 to 150 μF. Their high dielectric strength was made possible by a castor oil filling. Another advantage of their new design lies in the improved heat dissipation from the capacitor's interior to the aluminum can. In addition, hot spots are reduced and superior insulation properties are achieved, thus extending the operating life of the components to 100 000 hours (to IEC 61071). The capacitance changes by no more than 3 percent. Thanks to their high rated voltage, long operating life and high current handling capability, these capacitors are particularly well suited for renewable energy generation applications, such as for AC output filters in offshore wind turbines. The components are designed for a temperature range from -40 to +70 °C. M10 screw terminals assure a reliable electrical connection. The terminals can be modified according to the specific requirements of the customer or application. The cans have diameters of 75 or 85 mm. Their heights are between 115 and 270 mm. Thanks to the overpressure disconnector, these capacitors represent no hazard in the event of overload. Like all EPCOS film capacitors, the new series is also self-healing: sparkovers due to excessive voltages do not short-circuit or destroy the capacitor. Main applications AC output filters in wind power plants Main features and benefits High rated voltages of up to 1000 VRMS AC Good thermal properties thanks to filling with castor oil About TDK-EPC Corporation TDK-EPC Corporation (TDK-EPC), a TDK group company, is a leading manufacturer of electronic components, modules and systems headquartered in Tokyo, Japan. TDK-EPC has emerged from the combination of the electronic components business of TDK and the EPCOS Group and markets its products under the product brands, TDK and EPCOS. The product portfolio includes ceramic, aluminum electrolytic and film capacitors, ferrites and inductors, high-frequency components such as surface acoustic wave (SAW) filter products and modules, piezo and protection components, and sensors. With this product spectrum TDK-EPC offers a broad range of products and solutions of outstanding value from a single source and focuses on demanding markets in the areas of information and communication technology and automotive, industrial and consumer electronics. The company has design and manufacturing locations and sales offices in Asia, Europe, and in North and South America. Further information on the products can be found under