Technical Features

February 2012
CoolSiC™ MOSFET 750 V G1 from Infineon Make Onboard Chargers Smaller, Lighter and More Efficient

Click image to enlarge

Figure 1: Electric vehicle stock by mode in the Announced Pledges Scenario, 2022-2030 IEA Global EV Outlook 2023

­The International Energy Agency (IEA) predicts that by 2030, 60 percent of the automobile market will consist of electric vehicles (EV), resulting in over 200 million electric powertrains on the road (Figure 1). In addition to this rapid growth, the automotive industry must integrate various other trends, su
Date:
02/29/2024
Digital Power

Click image to enlarge


Compared to traditional analog PWM controllers, Digital power controllers provide an extremely high level of flexibility and programmability over the serial interface bus. The designer
. . . Learn More
Date:
02/03/2012
Efficient Utilization

Click image to enlarge

Figure 1: Harmonic Performance

As a designer and manufacturer of critical power systems used in airborne, shipboard and ground-based applications in the defense and commercial markets, Excelitas Technologies recognizes the
. . . Learn More
Date:
02/03/2012
Energy Saving

Click image to enlarge

Figure 1: Development of Converged Network Adapter ASICs

Wouldn't it be nice to save 25% to 30%, or even more, in circuit board power dissipation in your next design? While for some designs such a savings would just be nice to have, for
. . . Learn More
Date:
02/03/2012
High Power solutions

Click image to enlarge

Many applications in power management are based on buck topology. The purpose of this application note is to describe a technique to overcome the current limitation of these solutions. The
. . . Learn More
Date:
02/03/2012
Energy Efficient Micros

Click image to enlarge

Figure 1: Power budget

Although power consumption is the product of operating voltage (Vcc) multiplied by the current consumption (Icc), current consumption is usually the only parameter considered when describing the power
. . . Learn More
Date:
02/03/2012
Innovative Drives

Click image to enlarge

Figure 1: Internal structure of the ITRIP and RCIN sections

The megatrends in consumer drive systems are unbroken: The numbers of units are growing and so are the number of comfort features and quality requirements for the drive. With Infineon's
. . . Learn More
Date:
02/03/2012
White Goods Efficiency

Click image to enlarge

Figure 1. CAPZero high-level functional diagram

Recent studies have indicated that standby power consumption can range as high as 10 percent of all domestic electricity usage. Over the last few years, multiple programs - including
. . . Learn More
Date:
02/03/2012
Circuit Protection Design

Click image to enlarge

Figure 1: Typical solar power system diagram

Increasing demand for clean electrical power has led to a focus on renewable energy sources such as solar power. Solar power systems are independent power generation systems meant to power
. . . Learn More
Date:
02/02/2012
Renewable Energy Parking

Click image to enlarge

A new solar carport transforms the parking space into a provider of green power that should delight designers and owners of electric cars alike. Fitted with innovative lightweight solar
. . . Learn More
Date:
02/02/2012
Optimized Design for High-Temp Operation

Click image to enlarge

Figure1: The test circuit used for all turn-off measurements Lcomm= 3.2 μH?Configuration 1: Cclamp = 10 μF, Rclamp = 0.625 ?, L? = 330 nH?Configuration 2: Cclamp = 20 μF, Rclamp = 0.37 ?, L? = 325 nH

A 4.5 kV IGCT (Integrated Gate Commutated Thyristor) with extraordinary high Safe Operating Area (SOA) at 140°C is presented. The improvements for the IGCT were achieved by optimizing the corrugated
. . . Learn More
Date:
02/02/2012
Monitoring the Energy

Click image to enlarge

National Wind Energy Centre

NEL is a world-class provider of technical consultancy, research, testing, flow measurement and programme management services to the energy, oil & gas manufacturing industries and government. The
. . . Learn More
Date:
02/01/2012
Inverter Efficiency

Click image to enlarge

At least two power reactors are needed for solar inverters: one in the boost converter (step-up chopper) and one at the ouput of the inverter for EMC filtering. Besides the IGBTs, the losses in the reactors are a major determining factor of the overall efficiency of the inverter

Low-loss and high saturation flux density core materials in reactors and transformers are a key determining factor for the efficiency of inverters. The new TDK PE90 ferrite is a cutting-edge
. . . Learn More
Date:
02/01/2012
Solar Battery Charger

Click image to enlarge

Figure 1: Typical off-grid PV system

Photovoltaic cell technology over the last few years has reached levels of cost and efficiency that enable its use in new markets. Due to the varying sunlight conditions, energy storage
. . . Learn More
Date:
02/01/2012
Archives

 


-->