Artesyn launches 650W medical supply family

Date
10/28/2016

 PDF
porn porntube

Artesyn launches 650W medical supply family

Artesyn Embedded Technologies announced its new wide input range, single-output CNS650-M series of medical power supplies. Contained within an industry standard 4 x 6-inch footprint, these units can deliver 650 W with forced-air cooling (750 W peak) or 400 W with free-air natural convection cooling (650 W peak) and feature less than 500 mW no-load power consumption.

The CNS650-M series is available in 12 V, 24 V and 48 V variants, each with a 12 V fan output and 5 V standby. These power supplies can continuously deliver full output power across the wide temperature range of minus 40 degrees Celsius to 50 degrees Celsius and up to 80 degrees Celsius with derating.

These highly efficient power supplies carry medical and ITE safety approvals and incorporate 2XMOPP (Means of Patient Protection) to fully protect and isolate patients from the powered medical equipment. With an isolation of 4000 Vac (input to output) or 1500 Vac (input to PE; output to PE), these units are Type BF ready: for powering equipment where there is conductive contact with the patient, but not the heart, such as ultrasound monitors, blood pressure monitors, incubators, ECG equipment and operating tables.

Where an application requires more power, the active current share facility uses a signal wire to interlink two or more power supplies in parallel to increase output current capability. The built-in PMBus interface feature provides flexible and comprehensive digital communication via the PMBus command protocol with control and monitoring functions for voltage, current, temperature and the reporting of fault conditions.

Designers can use Artesyn’s universal PMBus GUI to configure and reconfigure voltages, thermal conditions, current limits and inhibit/enable settings for individual power supplies in real-time and save configuration specs for mass application. Users can also use the software’s built-in auto-detect mechanism to automatically detect and load PSU specific configuration files, enabling unmatched “plug and play” functionality.

The software also features real-time voltage, current and temperature monitoring tools to provide at-a-glance performance information that is automatically logged by the software and can be easily exported. The software also gives engineers the ability to create custom configuration files to fine-tune and optimize a variety of parameters to ensure the highest levels of performance and efficiency.

The CNS650-M range is less than 1U high and is available in U-channel, open-frame and enclosed end-fan options (open-frame and enclosed end-fan options currently available on 12 V model). The unit’s built-in 61000-3-2 compliant active power factor correction and Class B EMI filter deliver an EMI/RFI performance to Level B (conducted), Level B (radiated with cover).

Artesyn Embedded Technologies

RELATED