DESIGN CENTERS: AUTOMOTIVE & TRANSPORTATION

    Bourns Expands PWR163 Series Power Resistors with Reverse-Pin Configuration for Flexible PCB Layout

    11/17/2026
    Reverse packaging options support top-side cooling and alternative component orientation while retaining up to 25 W power capability (at 25 °C case temperature) and 0.1 μH maximum inductance.
    Bourns Expands PWR163 Series Power Resistors with Reverse-Pin Configuration for Flexible PCB Layout

    ­Bourns today announced that the Bourns® PWR163 Series Power Resistors are now available with a reverse-pin configuration for surface-mount designs requiring additional PCB layout and thermal-management flexibility. Reverse tape-and-reel and reverse tube packaging options allow the component to be installed in the alternative orientation while retaining the Series’ 25 W power rating (at 25 °C case temperature), 0.1 μH maximum inductance, electrically isolated backplate, and pulse-handling capability.

    Power-dense circuits can place substantial thermal and routing constraints on the PCB, particularly when the resistor must be positioned near a heat sink or cold plate. The reverse-pin configuration provides another mounting and routing option for directing the isolated backplate toward the cooling surface. This orientation can support top-side cooling without requiring the primary thermal path to pass through the PCB. The PWR163 Series’ compact package (smaller than a D²PAK), electrically isolated backplate, and low-inductance construction also support layouts where board area, switching frequency, and transient loading must be considered together.

    "Power electronics designers often need to position a resistor around the thermal path rather than design the thermal path around the resistor. The reverse-pin configuration gives them an additional mounting option while retaining the PWR163 Series’ 25 W rating, 0.1 μH maximum inductance, and electrically isolated backplate. These characteristics support compact layouts used with cold plates, precharge/discharge circuits, snubbers, and other high-power applications."
    — Walter Garcia, Product Line Manager, Resistors, Bourns

    Design Features

    • Smaller than a D²PAK package— reduces board-space requirements
    • Low inductance— supports high-frequency applications
    • Resistor electrically isolated from the backplate— simplifies electrical isolation and heatsinking
    • High power rating— supports power-dense designs
    • Compatible with lead free solder reflow temperatures— supports standard lead free assembly processes
    • RoHS compliant*— meets the cited substance-restriction requirements
    • AEC-Q200 compliant— supports automotive grade applications

    Electrical Specifications

    Parameter

    PWR163 Series Specification

    Resistance range

    0.02 Ω to 130 kΩ

    Power rating at 25 °C case temperature (W)

    25

    Resistance tolerance (%)

    ±11, ±5

    TCR (ppm/°C)

    ±100

    Thermal resistance, Rthj (°C/W)

    5.2

    Inductance (μH)

    0.1 maximum

    Operating voltage (V)

    √(P × R), 250 maximum

    Dielectric strength (VAC)

    2,000

    Insulation resistance (GΩ)

    10

    Operating temperature (°C)

    −55 to +155

    Moisture sensitivity level

    1

    1±1 % tolerance is available for most resistance values. Designers should check the Popular Resistance Values table for availability.

    Target Applications

    • Automotive
    • High-power industrial applications
    • Precharge, discharge and snubber circuits
    • Cold plates
    • Power electronics
    • High-frequency applications

    Availability
    The Bourns® PWR163 Series Power Resistors with reverse-pin configuration are available now through Bourns’ authorized distribution network. Reverse tape-and-reel packaging is available in quantities of 500 pieces per reel, and reverse tube packaging is available in quantities of 50 pieces per tube. Reverse-pin versions use their own recommended pad layout, shown in the data sheet. Full specifications and ordering information are available in the PWR163 Series data sheet. 

    Related

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Power Systems Design is a leading global media platform serving the power electronics design engineering community. It delivers in-depth technical content, industry news, and product insights to engineers and decision-makers developing advanced power systems and technologies.

    Published 12× per year across North America and Europe, Power Systems Design is distributed through online and fully digital editions, complemented by eNewsletters, webinars, and multimedia content. The platform covers key areas including power conversion, semiconductors, renewable energy, automotive electrification, AI power systems, and industrial applications—supporting innovation across the global electronics industry.