Bourns today announced that the Bourns® PWR163 Series Power Resistors are now available with a reverse-pin configuration for surface-mount designs requiring additional PCB layout and thermal-management flexibility. Reverse tape-and-reel and reverse tube packaging options allow the component to be installed in the alternative orientation while retaining the Series’ 25 W power rating (at 25 °C case temperature), 0.1 μH maximum inductance, electrically isolated backplate, and pulse-handling capability.
Power-dense circuits can place substantial thermal and routing constraints on the PCB, particularly when the resistor must be positioned near a heat sink or cold plate. The reverse-pin configuration provides another mounting and routing option for directing the isolated backplate toward the cooling surface. This orientation can support top-side cooling without requiring the primary thermal path to pass through the PCB. The PWR163 Series’ compact package (smaller than a D²PAK), electrically isolated backplate, and low-inductance construction also support layouts where board area, switching frequency, and transient loading must be considered together.
"Power electronics designers often need to position a resistor around the thermal path rather than design the thermal path around the resistor. The reverse-pin configuration gives them an additional mounting option while retaining the PWR163 Series’ 25 W rating, 0.1 μH maximum inductance, and electrically isolated backplate. These characteristics support compact layouts used with cold plates, precharge/discharge circuits, snubbers, and other high-power applications."
— Walter Garcia, Product Line Manager, Resistors, Bourns
|
Parameter |
PWR163 Series Specification |
|
Resistance range |
0.02 Ω to 130 kΩ |
|
Power rating at 25 °C case temperature (W) |
25 |
|
Resistance tolerance (%) |
±11, ±5 |
|
TCR (ppm/°C) |
±100 |
|
Thermal resistance, Rthj (°C/W) |
5.2 |
|
Inductance (μH) |
0.1 maximum |
|
Operating voltage (V) |
√(P × R), 250 maximum |
|
Dielectric strength (VAC) |
2,000 |
|
Insulation resistance (GΩ) |
10 |
|
Operating temperature (°C) |
−55 to +155 |
|
Moisture sensitivity level |
1 |
1±1 % tolerance is available for most resistance values. Designers should check the Popular Resistance Values table for availability.
Availability
The Bourns® PWR163 Series Power Resistors with reverse-pin configuration are available now through Bourns’ authorized distribution network. Reverse tape-and-reel packaging is available in quantities of 500 pieces per reel, and reverse tube packaging is available in quantities of 50 pieces per tube. Reverse-pin versions use their own recommended pad layout, shown in the data sheet. Full specifications and ordering information are available in the PWR163 Series data sheet.