Emerson Network Power Urges Design Engineers to "Go Configurable, Not Custom!" with Latest μMP1 Power Supply



With the launch of its latest ac-dc power supply, Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity™, is encouraging design engineers to "go configurable, not custom!" The μMP1 (MicroMP1) extends the company's successful line of configurable power supplies, providing market-leading density, efficiency, reliability and certifications, at a cost that rivals non-configurable power supplies while providing the flexibility that can eliminate the need for a custom solution in many scenarios. The low-profile 1U (1.57 inch; 39.89 mm) Emerson Network Power μMP1 has six available expansion slots, allowing engineers to mix-and-match modules for up to 12 outputs ranging from 0.9 V to 60 V. It offers a power density of 13.9 W per cubic inch and operating efficiency of up to 91 percent typical at full case load. The case can deliver up to 1,200 W of output power with no minimum load requirement. The μMP1 accepts a wide input voltage range of 85 Vac to 264 Vac and is equipped with active power factor correction rated at 0.99 typical to minimize input harmonic current distortion. Designed to ensure high efficiency and reliability - even in extreme environmental conditions - the power supply is rated for performance at temperatures from minus 40 to 70 degrees Celsius. It can withstand a shock/vibration of more than 50 G, contributing to a high demonstrated mean-time between failures of more than 550,000 hours at full load. Conformal coating is also available as an option. In addition, the μMP1 is equipped with full EN60601 medical safety approvals, making it ideal for certain medical applications, as well as industrial, process automation, robotics and telecommunications. Microcontrollers integrated into the case are supported by Emerson Network Power's intuitive GUI-based PMBus® control software, which can be downloaded free from the company's web site. The software provides OEMs with superior flexibility, including real-time input voltage, current and temperature monitoring to provide at-a-glance performance confirmation for the entire power supply. The μMP1 is pre-certified with a host of safety specifications - including UL, CSA, VDE, BABT, BSMI, CB, and CE certifications - to ensure rapid, cost-effective power provisioning off-the-shelf and enable shorter design-to-manufacture timelines. The power supply also meets EMI Class B and EN61000 standards for conducted noise and Restriction of Hazardous Substances (RoHS) directives. The μMP1 is available now, with pricing dependent on configuration. For more information or to inquire about a sample, visit: www.PowerConversion.com/products/cat/118/Configurable-Power-Supplies-uMP-Series. For more information on Emerson Network Power's embedded power products and services for original equipment manufacturers and system integrators visit www.Emerson.com/EmbeddedPower. Learn more about Emerson Network Power products and services at www.EmersonNetworkPower.com. www.Emerson.com