Fairchild's optoplanar packaging technology drives advanced 2.5 A-output optocoupler

Date
03/27/2014

 PDF

System design engineers for industrial applications, such as motor control inverter applications and high performance power systems, are looking for highly integrated gate driving and protection features in a single IC package to simplify design and improve efficiency. The newly-developed FOD8332 is an advanced 2.5 A output current IGBT/MOSFET drive optocoupler.

The device’s insulation working voltage rating (VIORM) of 1,414 V is 13 percent higher than the competition, permitting the device to directly drive 1200 V IGBTs. Common Mode Transient Immunity (CMTI) is more than 100 percent better than competitive solutions, while Dynamic Power Consumption per cycle (ESW) during switching is 50 percent less than the competition.

These high-voltage parts allow systems of a given power rating to operate at higher voltages and lower currents where the noise filtering becomes less lossy resulting in higher efficiency inverters.
The FOD8332 integrates critical protection features necessary for preventing fault conditions that lead to destructive thermal runaway of IGBTs. It reduces design complexity as most protection features are built-in, eliminating the need for the board designer to specify additional components.

The device utilizes Fairchild’s proprietary Optoplanar® coplanar packaging technology and optimized IC design to achieve high insulation voltage and high noise immunity, characterized by high common mode rejection. The device is housed in a wide body 16-pin small outline plastic package which delivers high isolation performance in a compact package.

“Fairchild delivers a unique combination of power devices, design expertise and manufacturing experience to its customers, allowing them to power amazing electronic products,” said John Constantino, Director for Isolation and Optoelectronics at Fairchild. “The FOD8332 was developed after customer input and incorporates several features that specifically address the critical challenges they faced. This is part of our customer-centric focus and our goal of being the go-to source for innovative power management solutions.”

Key Features:
-Input LED Drive Facilitates Receiving Digitally Encoded Signals from PWM Output
-Optically Isolated Fault-Sensing Feedback
-Active Miller Clamp to Shut Off IGBT During High dv/dt without Negative Supply
Voltage
-High Noise Immunity Characterized by Common Mode Rejection – 35 kV/μs
Minimum, VCM = 1500 VPEAK
- 2.5 A Peak Output Current Driving Capability for Medium Power IGBT
-P-Channel MOSFETs at Output Stage Enable Output Voltage Swing Close to Supply
Rail (Rail-to-Rail Output)
-Wide Supply Voltage Range: 15 V to 30 V
-UL1577, 4,243 V RMS for 1 Minute
- DIN-EN/IEC60747-5-5 (Pending):
-1,414 VPEAK Working Insulation Voltage
-8,000 VPEAK Transient Isolation Voltage Rating
-8 mm Creepage and Clearance Distances

Applications:
-Isolated IGBT/Power MOSFET Gate Drive
-Renewable Energy – Solar Inverter, Wind Power Inverter
-AC and Brushless DC Motor Drive
-Industrial Inverter
-Uninterruptible Power Supply
-Induction Heating

Fairchild Semiconductor
 

Related articles

 A Miniature Stretchable Pump for Next Gen of Soft Robots
 Current Sense Chip Resistors Include a 0.3 Milliohm Value
 Enhancing AI Quality by Moving Beyond the Quantitative