Gen2 650-V ultrafast diodes reduce switching losses

Date
06/07/2013

 PDF

Vishay Intertechnology released 11 new Gen2 650 V FRED Pt® Ultrafast diodes. The "H" family of bare die devices, suitable for applications working above 40 kHz, combine extremely fast and soft recovery time with low forward voltage drop and reverse leakage current to reduce switching losses in solar inverters, UPS, electric vehicles and hybrid electric vehicles, welding machines, servers, and continuous conduction mode power factor correction (CCM PFC). The "U" series, available on request for applications up to 40 KHz, offers a much lower forward voltage drop to optimize conduction losses. The Vishay Semiconductors Ultrafast diodes released today are offered with a wide range of rated currents from 2 A to 150 A. The high blocking voltage capability of the devices allows designers to provide additional safety margins and increase power density in end products. Equivalent packaged devices are available on request. To maximize efficiency, the diodes are offered with a wide range of forward voltage vs. reverse recovery time ratios. The devices feature typical reverse recovery times down to 28 ns at +25 °C (di/dt = 200 A/μs) and forward voltage down to 1.38 V typical. For a more robust and cost-effective design, the diodes offer a maximum operating junction temperature of +175 °C. Vishay

Related articles

 Are you SiC of Silicon? – Part 5
 A Miniature Stretchable Pump for Next Gen of Soft Robots
 Current Sense Chip Resistors Include a 0.3 Milliohm Value