Inductive components suit drive automation applications



SMP Sintermetalle Prometheus (SMP) offers inductive components for drive technology applications. Intended for use in frequency converters for automation tasks, the devices are low-loss, have good EMC characteristics, and a space-efficient design. Frequency converters have installed the inductive components both at the input, where they provide power recovery, and at the converter's output, where they act as filter chokes. Because of their space-saving design and low-noise operation, SMP's chokes are also used in frequency converters' internal DC links, as both single and common-mode chokes.

The components' cores consist of powder composites with low magnetostriction, which SMP specifically engineers for each application. With their low eddy current and hysteresis losses, the materials contribute to the components' exceptional efficiency. Their encapsulated design ensures that the components emit only low-intensity stray fields - another requirement in frequency converters - which allows other components to be placed in close proximity to the choke without running a risk of magnetic interaction with the choke. With their compact design, SMP's chokes occupy 25 percent less space than conventional components.

Besides inverters, SMP's inductive components are used in wind turbines, in photovoltaic inverters, in medical engineering, railway engineering and many other drive and power electronics applications. The components can be produced for frequencies of up to 200 kHz and currents of up to 1000 amperes. Their sizes range from 36 mm to 300 mm diameter and their weight from 50 g to 130 kg. Depending on the application, degrees of protection from IP00 to IP66 are available. All components are RoHS- and REACH-compliant and the materials used are UL-listed.

SMP Sintermetalle Prometheus