Leti and STMicro demonstrate ground-breaking DSP at ISSCC 2014

Date
02/14/2014

 PDF

CEA-Leti and STMicroelectronics have presented the successful demonstration of an ultra-wide-voltage range (UWVR) digital signal processor (DSP), based on 28nm ultra-thin body buried-oxide (UTBB) FD-SOI technology.

The device, produced by ST in their 28nm UTBB fully depleted SOI process technology, allows body-bias-voltage scaling from 0V to +2V, decreases minimum circuit operating voltage, and supports clock-frequency operation of 460MHz at 400mV.

The demonstrator achieves UWVR, greater energy efficiency, and unprecedented levels of efficiency in voltage and frequency using a combination of design techniques. ST and Leti developed and optimized standard cells libraries over the 0.275V-to-1.2V range: they offer ideal implementation results by virtue of non-overlapping power-performance characteristics. Among the optimized cells, fast pulse-triggered flip-flops are designed for variability tolerance at low voltage.

Additionally, on-chip timing-margin monitors dynamically adjust the clock frequency to a few per cent of the maximum operating frequency, independent of supply-voltage value, body-bias-voltage value, temperature, and process technology. As a result, even at 0.4V, the DSP exhibits 10x state-of-the-art operating frequency.

“UTBB FD-SOI technology is ST’s Faster, Cooler, and Simpler solution: it delivers significant improvements in performance and power savings while minimizing adjustments to existing design and manufacturing methodologies. This demonstration DSP shows that FD-SOI is blazing the trail for better portable and battery-powered products, using more efficient semiconductor chips, all the way down to the 10nm node,” said Philippe Magarshack, Executive Vice President, Design Enablement Services, STMicroelectronics.

“Leti’s ability to bridge innovation and upstream industry was key to developing advanced design techniques for leveraging intrinsic power and performance benefits of the technology, and then designing dedicated components that could ultimately suit Internet-of-Things end products,” said Thierry Collette, Division Vice President at Leti and head of the Design and Embedded Systems Platform.

A Leti/ST paper at ISSCC, “A 460MHz at 397mV, 2.6GHz at 1.3V, 32b VLIW DSP, Embedding Fmax Tracking,” was presented on Feb. 12, during Session 27, “Energy-Efficient Digital Circuits”. A demonstration kit was shown to attendees.

CEA-Leti

STMicroelectronics

Related articles

 Switchboard Enhances Safety and Reduces Downtime
 ERNI Reduces Lead Times for Multiple Connector Product Lines
 Mouser Electronics Now Stocking Qorvo's Front-End Modules