>
Product News

 



 

 

Maxim's Isolated CAN Transceivers Ensure Robust Communications for Industrial Systems

 PDF

MAX14878/79/80 increases uptime with ±54V fault protection and industry-leading ±15kV ESD


Designers can ensure robust communication and improve uptime for industrial systems with the MAX14878, MAX14879, and MAX14880 2.75kV and 5kV family of isolated controller area network (CAN) transceivers from Maxim Integrated Products.

 

Nowadays, CAN is widely deployed in various industrial applications. Operators face several challenges, as they require integrated isolation and a robust interface to withstand noisy environments. In addition, they risk communication failures through faults/shorts on the transceiver inputs, system robustness against electrostatic discharge (ESD) strikes, and large ground shifts in industrial environments.

 

The family of high-speed transceivers integrates up to 5kV integrated galvanic isolation with fault protection and ±15kV Human Body Model (HBM) ESD to increase uptime in harsh and noisy environments. They operate up to the maximum high-speed CAN data rate of 1Mbps and feature ±54V fault protection on receiver inputs. Available in industry-compatible pin-outs, the transceivers are packaged in a wide-body 16-pin SOIC package with 8mm of creepage and clearance and operate over the -40-degree Celsius to +125-degree Celsius temperature range.

Related articles

 Automation Transformers Reduce Total Cost of Ownership
 Real-Time Spectrum Analyzer Provide Resolution Bandwidth Down to 1Hz
 TRACO POWER’s TVN Series of isolated and fully regulated DC/DC converters combine a high level of efficiency with a low level of output ripple & noise

 

 

Log in to read and post comments.

 



 Home | Site Map | Contact | Privacy Policy | Refund Policy | Terms of Service | Copyright © 2018 Power Systems Corporation, All rights reserved