MicroPower Direct's new 1W DC/DC converter family offers 96 models

Date
02/02/2017

 PDF

MD100x 1W DC/DC converters

Available now from MicroPower Direct, the MD100x is a family of low cost, 1W DC/DC converters packaged in a miniature SIP package. Ninety six models provide a wide selection of single & dual output models with I/O isolation levels ranging from 1 kVDC to 6 kVDC.

Models operate from 3.3, 5, 12, 15, 24 and 48 VDC inputs, providing single and dual outputs of 3.3, 5.0, 7.2, 9.0, 12, 15, 18, 24, ±3.3, ±5, ±7.2, ±9.0, ±12, ±15, ±18 or ±24 VDC. Standard features include efficiency as high as 86%, I/O isolation of 1.0 to 6.0 kVDC, and low noise operation. The MTBF (per MIL HDBK 217F) of the MD100x series is greater than 1.12 Mhours. All models are approved to EN 60950.

The MD100x family is packaged in a miniature, 7-pin SIP case that requires very little board space. The pin out is industry standard and all case materials meet UL94-V0 requirements. Each model is specified for operation over the wide operating temperature range of -40°C to +85°C with no heat sinking required. Cooling is by free-air convection.

The MD100x series, with its very wide model selection, miniature packaging, high isolation models and low cost is an ideal solution for a wide variety of board level power distribution applications. Considerable attention is given to the proper selection, derating, and layout of all circuit components. In addition, extensive reliability screening is also performed on all products as a routine part of our production process. 

MicroPower Direct

RELATED

 


-->