ON Semiconductor to showcase their latest tech at PCIM 2015

Date
04/20/2015

 PDF

ON Semiconducto will be showcasing some of its latest advances at PCIM 2015

ON Semiconductor, driving energy efficient innovations, will be showcasing some of its latest advances in power management technology at PCIM 2015, including compact IPM, significant developments in GaN, and a sensor-less motor driver controller. Featured demonstrations include:

 

· Current-Mode LLC Power Supply

One of the demonstrations will include the industry’s first current-mode LLC controller, the NCP1399, highlighting the safety features and benefits inherent to a current-mode control approach. The power supply reference design will incorporate the NCP1399 along with ON Semiconductor’s NCP4810 X2 capacitor discharger, NCP1602 power factor controller, and NCP4305 synchronous rectification controller. This system solution is predominantly aimed at power supplies for all-in-one computers and large LED TVs, as well as ultra-high density power adapters. It is capable of achieving markedly higher performance, lower standby power and higher power conversion efficiency levels than would be possible using competitive devices. The current-mode control architecture of the NCP1399 is the heart of the power supply reference design bringing built-in protection features, faster transient response and light load efficiency enhancements. The NCP4305 provides improved efficiency with a large 8 A driver and built-in light load detection.

 

· Converter with GaN High-Electron-Mobility Transistors (HEMTs)

A two-stage converter demonstrating the latest high-efficiency results obtainable with GaN will also be featured at PCIM. This 240 watt (W) supply achieves 95 percent peak efficiency with the NCP1397 LLC controller, NCP1654 power factor correction controller, and TPH3202PS or NTP8G202N GaN transistor switching devices. The board utilizes GaN HEMTs in both the PFC stage and in the primary side of the LLC stage.

 

· Automotive Motor Driver

The motor driver demonstration showcases a next generation software-less automotive motor driver solution, LV8907. On-chip intelligent sensor-less commutation logic enables LV8907 to drive a brushless DC (BLDC) motor without any position sensor, thereby reducing the solution cost and footprint. This software-less solution with on-chip configuration registers can be customized for a wide range of motor and load combinations using an easy-to-use and free graphical user interface (GUI) utility from ON Semiconductor. LV8907 with pre-loaded configuration registers can drive the motor in a stand-alone mode without an external system controller. With an integrated LIN transceiver, LV8907 can also deliver a LIN-based advanced motor drive solution using a small and low cost companion controller that is required only for LIN management tasks.

 

· Scalable solution, the new “Compact” IPM product range

Introduction of the new range of 600V IPM for 3 phase motors for current requirements from 3A to 15A. The device part numbers STK5C4U332J-E and STK5Q4U3xxJ-E are dedicated for applications in the consumer and light industrial area. Scalability of power output by applying DIPS / DIPS3 packages with outlines of 18.2mm * 29.6mm for all devices support easy adoption to changing requirements in the application. The excellent heat dissipation characteristics in combination with low losses IGBT enables highly efficient operation at large power density. The integrated protection functions are the guarantee for save, reliable and long term operation. Design support tools like the online loss simulation and evaluation boards, enable the designer to quickly and cost effect realize the solution for his application.

 

They invite you to their presentation at the Exhibitor Forum - Hall 7, booth 260- on Thursday May 21st at 14:00. The presenters Chris Rexer and Jason Mc Donald will talk about ‘Advanced Silicon and GaN Power Technologies from ON Semiconductor for next generation applications in the Medium to High Voltage Range’.

 

Additionally, ON Semiconductor technical experts will be giving presentations as part of the conference agenda:

 

Tuesday May 19th, Poster Dialogue Sessions at the Foyer Ground Floor Entrance NCC Mitte, 15:30 – 17:00
· Development of 650V Cascode GaN Technology by Charlie Liu
· 1 kW LLC Resonant Converter with HV GaN Switches by Adam Vasicek
· Design Considerations to Increase Power Density in induction cooking Applications using the new Field stop II Technology IGBT by Vittorio Crisafulli and Marco Antretter

 

Wednesday May 20th, Poster Dialogue Sessions at the Foyer Ground Floor Entrance NCC Mitte, 15:30 – 17:00
· Kelvin Source Connection for High Current IGBTs. A way to get high Energy Efficiency by Vittorio Crisafulli and Marco Antretter

 

ON Semiconductor

RELATED

 


-->