>
Product News

 



 

 

Pacific Power Source Adds DC Power Compliance Testing to Airbus ABD0100.1.8.1 A350 Avionics Test Option

 PDF

New version adds DC Test Sequences for Power Compliance Testing to Airbus A350 standard


Irvine, California -- Pacific Power Source is pleased to announce the release of a comprehensive update of its suite of test routines designed to test both AC and DC products for compliance with Airbus standard ABD0100.1.8.1, “Electrical and Installation Requirements”. The ABD0100.1.8.1 test standard is largely based on the DO160, Section 16 standard published by the Radio Technical Commission for Aeronautics (RTCA), a private, not-for-profit Corporation that develops consensus based recommendations regarding communications, navigations and air traffic management for commercial aviation. There are several adaptations and deviates from DO160 however that necessitates the need for a dedicated suite of test routines.

Available as an integrated option package running inside Pacific Power Source’s PPSC Test Manager Test Executive program, the ABD0100.1.8.1 option includes the latest revision C test sequences for both AC and DC power groups.  Power groups include single and three phase, fixed 400Hz frequency as well as single and three phase, variable frequency power groups, covering the frequency span of 360Hz to 800Hz.  The LDC 28Vdc power group is now supported as well on the AFX Series AC and DC power source family. Test sequences for AC with DC offset testing have been added as well.

Detailed test reports in Rich Text Format are generated automatically at the end of each test run.  Included test report templates can be customized by the operator with the End-user Logo’s and company names as desired.

The new Pacific Power AFX Series programmable power source support both AC and DC testing. As an integral part of the PPSC Studio software, the ABD0100.1.8.1 test option AC test sequences are also supported on the Linear AMX Series AC Power Sources for AC testing only.

Target customers for this new ABD0100.1.8.1 test option are EMC Test Labs involved with commercial aviation product certification and testing for Airbus suppliers.  Also, manufacturers of AC and DC powered avionics equipment that need to certify their products to the Airbus A380 standard can use this option to check for compliance during early stages of product development.

For more information, visit www.pacificpower.com

Related articles

 Dimming Fixture Controllers Help Operate a Variety of Lighting Fixtures
 Resistors Deliver Robust Performance in a Small EIA 0402 Outline
 256Mb High-Speed CMOS SDRAMs Offered in the 54-Pin TSOP II Package

 

 

Log in to read and post comments.

 



 Home | Site Map | Contact | Privacy Policy | Refund Policy | Terms of Service | Copyright © 2018 Power Systems Corporation, All rights reserved