TRACO POWER’s smallest 2 Watt SMD DC/DC converter


DC-DC Converters, Power Conversion, Power Distribution, Power Factor Correction (PFC), Power ICs, Power Management, Power Measurement, Power Modules, Power Monitoring, Power Quality, Power Semiconductors, Power Supplies, Regulated Power Supply, Switching-Mode Power Supply (SMPS)

#tracopower #psd #dcdc

Most compact 2 Watt SMD converter

TRS 2 Series is a new series with the design purpose to improve the prevalent 2 Watt SMD DC/DC converters in terms of size, cost, efficiency and performance. The main intended uses for the TRS 2 Series are IT applications, industrial control systems and also measurement equipment.

With the reduction of thermal loss, the operating temperature range can be expanded from -40°C to +90°C. The converters are fully regulated over 0 - 100% load (no minimum load is required). The low input range is extended from 4.5 to 13.2 VDC (to include 12V battery powered applications) while models are also available with the standard 2:1 input ranges of 9-18, 18-36 and 36-75 VDC. The functional I/O-isolation system is approved to IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC.

12 mm x 11 mm x 7.8 mm (0.47 x 0.44 x 0.31 inch)

Cost-efficient design

1600 VDC I/O isolation (functional)

High efficiency for low thermal loss

Operating temperature range -40°C to +90°C

UL 62368-1 (UL 60950-1) IT approvals

No minimal load required

Protection against short circuit

3 years product warranty

Related articles

 Infrared Detector Components from a Single Source
 ROHM highlights high-performance D/A converter IC
 RS Components introduces Siemens DIN rail power supply range