The IOSC-EV Board comes with six smaller boards that can be snapped from the side of the main board and onto which different size 4 pad packaged oscillators can be soldered. The smaller board can then be soldered to the main PCB. The six different package sizes are 1.6 x 1.2mm, 2.0 x 1.6mm, 2.5 x 2.0mm, 3.2 x 2.5
Intepro Systems announces its advanced benchtop/rack mount Procyon Battery Test System for engineering design and production testing of high-performance electro mobility battery packs. The Procyon Battery Test System utilises Intepro’s innovative bi-directional charge/discharge regenerative power stage that ret
With an ultra-low Iq of 250 nanoamps (nA) versus the approximate 1 uA operation of traditional devices, the MCP1811 LDO reduces quiescent current to save battery life, enabling end-users to recharge or replace batteries less often. The minimised power consumption enables portable electronic devices to run for m
The device also offers higher precision plus an intuitive touchscreen display for enhanced ease of use and improved productivity.
The DLM3000 builds on Yokogawa’s oscilloscope legacy with new features focusing on quality, flexibility and usability to increase users’ productivity and meet the advanced needs of
Leveraging ADI’s iPassives integrated precision passives technology, the AD4111 and AD4112 A/D converters integrate precision matched current sense resistors and resistor dividers. The high degree of channel-to-channel matching simplifies calibration requirements, and with support for up to eight single-ended vol
Power Integrations announced the release of LinkSwitch-XT2 offline switcher ICs incorporating 900 V power MOSFETs.
Targeting high-efficiency isolated and non-isolated flyback power supplies up to 8 W, the up-rated ICs are suitable for three-phase industrial power supplies to 480 VAC and high-quality consumer produ
The RFM provides a power-factor-corrected, regulated, and isolated DC output with integrated filtering and built-in fault protection for redundant operation. The RFM can be configured to accept worldwide 3-phase AC mains from 200 to 480VAC.
The low-profile power tablet design of the RFM enables unprecedented power
They also feature a high ESD dielectric strength with a contact discharge of up to ±30 kV. WE-TVS diodes in the three series “Standard”, “High Speed”, and “Super Speed” offer effective protection against electrostatic discharges at all protection levels. The new TVS diodes meet the industrial standards
The devices are normally-ON with zero voltage gate drive, making them particularly suited for applications such as very fast action, solid-state circuit breakers and circuit protection generally where a default to an ON-state is necessary in the absence of gate power. The devices are also commonly used in series co
Following on from the recently introduced 750W PKJ4000 series, the PKB-D is a high-density converter in the industry standard eighth-brick format with an output of 50V at 5A, and an input voltage range of 36 to 60V. This makes it ideal for 50V GaN based RFPA’s and also high voltage LDMOS applications.
Th
Capable of withstanding a 10G vibrational force for a period of 6 hours, the components in Harwin’s new M225 connector series are intended for industrial deployment.
These compact, high performance cable-to-board units feature a robust construction for prolonged operational lifespan, thanks to their glass-reinfor
Demand is growing for compact electronic components that consume less electrical power for use in digital devices for IoT and wearable applications where small size and long operating times are essential to market success. As many modern devices rely on accurate timing, there is an increasing need for low powe
HARTING has been selected as the first producer to support a common interface between the CAx data providers CADENAS and Zuken E³.series. Fast and reliable access to component libraries is essential for smooth production processes and meeting time-to-market targets.
Zuken and CADENAS have announced a partnership to st
The fail-safe availability of process-relevant systems and components begins quite fundamentally with the uninterruptible power supply (UPS) and the associated protection against power failures, flicker, fluctuations or voltage dips in the 12V or 24V DC power supply. Decentralized and compact DC UPS systems are inc
Now engineers designing into applications in factory automation, medical, communications and consumer markets can tap into four new micro-system-level IC (“uSLIC™”) modules from Maxim Integrated Products, Inc. (NASDAQ: MXIM). The MAXM17552, MAXM15064, MAXM17900 and MAXM17903 step-down DC-DC power modules join
The ALM85 & ALM120 use less energy in both operating and standby mode, helping to reduce environmental impact. Meeting the latest international Energy Efficiency Level VI and CoC Tier 2 standards, applicable for the US, UK and Europe, the ALM series also has both medical and ITE safety approvals targeting
SAN JOSE, Calif.—Now engineers designing into applications in factory automation, medical, communications and consumer markets can tap into four new micro-system-level IC (“uSLIC™”) modules from Maxim Integrated Products, Inc.. The MAXM17552, MAXM15064, MAXM17900 and MAXM17903 step-down DC-DC power modules join Maxi
Two-photon image of neural tissue controlling the front legs of the fly. Neurons express fluorescent proteins to visualize neural activity (cyan) and neural anatomy (red).
One of the major goals of biology, medicine, and robotics is to understand how limbs are controlled by circuits of neurons working together. And as if that is not complex enough, a meaningful study of limb activity also has to take place while animals are behaving and moving. The problem is that it is virtually im
San Diego, CA — Express Logic announced that it has integrated the STMicroelectronics Software Self-Test Libraries (X-CUBE-STL) with the X-Ware IoT Platform for developers using STM32 microcontrollers based on ARM cores.
X-Ware IoT Platform leverages the X-CUBE-STL to help customers more quickly navigate thro
MIDDLEBOROUGH, Mass. – Sager Electronics is now stocking MEAN WELL’s SDR Series 75-960 Watt AC-DC, DIN Rail power supplies.
The SDR series is a slim size AC-DC DIN Rail power supply in a metal case that can be installed on a TS-35/7.5 or 15 mounting rail. It features operation from 90-264VAC (180-264VAC for
As usual, autumn means conference season. And this year conference season will be dominated by electronica as it is every second year. All of the famed German organisational stereotypes will be tested to their limits, with the conference expanding to 16 halls. For me personally, that means even more walking be
