Motor Drives, Robotics & Controls

    June 2025
    Optimizing BLDC Motor Control Through System Simulation

    Click image to enlarge

    Figure 1: How to run the ACT72350 BLDC motor example

    Why BLDC motors? Electric motors are responsible for roughly 50% of the world’s total electrical energy consumption, according to the European Commission1. Improving motor efficiency not only reduces operational costs but also plays a vital role in lowering global CO₂ emissions. Among available motor te
    . . . Learn More
    Date:
    06/30/2025
    X-FAB Expands 180nm XH018 Process with New Isolation Class for Enhanced SPAD Integration

    X-FAB Expands 180nm XH018 Process with New Isolation Class for Enhanced SPAD Integration

    X-FAB Silicon Foundries SE, the leading analog/mixed-signal and specialty foundry, has released a new isolation class within its 180nm XH018 semiconductor process. Designed to support more compact and efficient single-photon avalanche diode (SPAD) implementations, this new isolation class enables tighter fun
    . . . Learn More
    Date:
    06/19/2025
    High-Efficiency GaN Inverter Brings GaN Power to Medium-Voltage Motor Drives

    High-Efficiency GaN Inverter Brings GaN Power to Medium-Voltage Motor Drives

    ­Efficient Power Conversion Corporation (EPC) announces the release of the EPC9196, a high-performance 25 ARMS, 3-phase BLDC motor drive inverter reference design powered by the EPC2304 eGaN® FET. The EPC9196 is specifically designed for medium-voltage (96 V – 150 V) battery-powered motor drive applications, in
    . . . Learn More
    Date:
    06/10/2025
    Renesas Brings USB-C Rev. 2.4 Support to New Ultra-Low-Power RA2L2 Microcontroller Group

    Renesas Brings USB-C Rev. 2.4 Support to New Ultra-Low-Power RA2L2 Microcontroller Group

    ­Renesas Electronics Corporation, a premier supplier of advanced semiconductor solutions, today introduced the RA2L2 microcontroller (MCU) group with ultra-low power consumption and the industry’s first support for the new UCB-C Revision 2.4 standard. Based on a 48-MHz Arm Cortex M23 processor, th
    . . . Learn More
    Date:
    06/10/2025
    Electrical Motors Get Powered Up with GaN

    Ally Winning, European Editor, PSD

    ­Welcome to the June issue of Power Systems Design Europe. June marks the end of the first half of the year, and so far it has been a busy year for the industry. Personally I’ve been to both APEC in Atlanta and PCIM in Nuremberg, finding out about the latest innovation in the industry. I’ll be writing about th
    . . . Learn More
    Date:
    06/01/2025
    Cobotting into the Future

    Jason Lomberg, North American Editor, PSD

    ­Welcome to the June issue! We’re less than a month away from the official start of summer, so it’s time to kick back, relax, and give maximum effort (because we haven’t had the summers off since we were kids). But hey, it’s fine to live (and relax) vicariously through our kids, right? We’re
    . . . Learn More
    Date:
    06/01/2025
    Robotics, Motor Drives and Controls

    Kevin Parmenter, Director, Applications Engineering. TSC, America

    ­As of 2023, the global market for motors and drives for robotics was valued at approximately $6.8 billion. It is projected to grow at a compound annual growth rate (CAGR) of 10.5% by 2030, fueled by the widespread adoption of automation technologies across sectors such as manufacturing, healthcare, and logistics, ac
    . . . Learn More
    Date:
    06/01/2025
    Motor Drive ICs With Performance, Protection & Bi-Directional Sensing

    Click image to enlarge

    Figure 1: 600W washing machine drive built with silicon IGBTs

    ­Electric motors and drives are estimated to consume about 45% of the total electricity generated worldwide. That’s equivalent to more than 12,000 terawatt hours (TWh) per year, or about 1,000 times the total output of China’s 5 GW Xinjiang solar farm (the world’s largest), which was connected to the gr
    . . . Learn More
    Date:
    06/01/2025
    The Benefits of GaN in Motor Drive/Inverter Designs

    Click image to enlarge

    Figure 1: Comparing power outputs for discrete and IPM MOSFET/IGBT and GaN solutions

    ­Although gallium nitride (GaN) has been discussed as an interesting solution for inverters and motor drives for ten years, there have been very few real applications of GaN in this sector to date. However, now that GaN has been proven in other applications, such as chargers, its value proposition is now being se
    . . . Learn More
    Date:
    06/01/2025
    Advanced Current and Voltage Sensing Enables Ultra-Precise Robots

    Click image to enlarge

    Figure 1: Current- and voltage-sensing accuracy impacts how precise robotics can perform tasks

    ­Robots have become commonplace in industrial applications. However, up until now, their usage has been restricted to tasks that do not require the highest levels of precision. It is hard to imagine a humanoid robot being asked to attempt to thread a needle, or a collaborative robot (cobot) to handle fragile it
    . . . Learn More
    Date:
    06/01/2025
    Unlocking Robotic Intelligence

    Click image to enlarge

    Figure 1: Melexis’ Tactaxis® technology supports the move towards more human-like robotics that can operate closely with humans in applications ranging from industrial cobots and domestic service robots

    ­As the robotics industry advances into increasingly sophisticated roles, especially within service and humanoid applications, the need for machines that interact with their environments almost as naturally as humans has never been greater. While intelligent control systems lay the foundation for autonomy and pr
    . . . Learn More
    Date:
    06/01/2025
    Designing to Protect: Industrial Motor Drive Circuits

    Click image to enlarge

    Figure 1: The 8/20 µs current waveform is widely used to test overvoltage devices and originates from UL 1449

    ­Motor drive circuits employed in a wide range of today’s industrial, commercial, and consumer applications are responsible for controlling the speed, torque, and position of electric motors, enabling precise motion and energy efficiency. However, motor drives are often exposed to electrical threats such as
    . . . Learn More
    Date:
    06/01/2025
    Archive

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Power Systems Design is a leading global media platform serving the power electronics design engineering community. It delivers in-depth technical content, industry news, and product insights to engineers and decision-makers developing advanced power systems and technologies.

    Published 12× per year across North America and Europe, Power Systems Design is distributed through online and fully digital editions, complemented by eNewsletters, webinars, and multimedia content. The platform covers key areas including power conversion, semiconductors, renewable energy, automotive electrification, AI power systems, and industrial applications—supporting innovation across the global electronics industry.