Industrial

    May 2016
    TDK's encapsulated medical supplies have Class II input

    KMS-A series pcb mount power supplies

    TDK announced the introduction of the KMS-A series of single output, medically-certified 15W - 60W encapsulated power supplies. With a Class II input, the products require no earth ground connection, making them ideal for use in a range of medical, dental and home healthcare. They are also suitable for broadcast, te
    . . . Learn More
    Date:
    05/31/2016
    Linear's 150V low IQ inverting synchronous DC/DC controller uses a single inductor

    LTC3896, a high-voltage inverting switching regulator controller

    Linear Technology introduced the LTC3896, a high-voltage inverting switching regulator controller that drives an all N-channel synchronous power MOSFET stage. Most low to medium power inverting DC/DC converters utilize a coupled inductor or transformer. However, the LTC3896 uses only a single inductor and converts a 4
    . . . Learn More
    Date:
    05/25/2016
    TI's latest SWIFT converter claims industry’s highest power density

    TPS54A20 SWIFT synchronous DC/DC converter functional block diagram

    Texas Instruments introduced the industry’s first 12-V, 10-A, 10-MHz series-capacitor buck converter that achieves more than 50 A/cm3 in current density, which is four times higher than any other 12 V power management component or solution available today. The unique topology of the TPS54A20 SWIFT synchronous DC/D
    . . . Learn More
    Date:
    05/23/2016
    Avnet, a leading global technology distributor, announced an expanded, exclusive distribution agreement with Broadcom. Under the new agreement, Avnet will serve as the exclusive broadline distributor for Broadcom in the Americas and EMEA regions. Avnet will also continue its franchise in Asia. As part of t
    . . . Learn More
    Date:
    05/23/2016
    Allegro launches quad DMOS full bridge PWM motor driver IC

    A5988 Quad DMOS full-bridge driver IC

    Allegro MicroSystems announced a new quad DMOS full-bridge driver IC capable of driving up to two stepper motors or four DC motors. Each full-bridge output is rated up to 1.6 A and 40 V. The A5988 includes fixed off-time pulse-width modulation (PWM) current regulators, along with 2- bit nonlinear DACs (digital-to-analog co
    . . . Learn More
    Date:
    05/23/2016
    Toshiba’s 2nd-gen SiC Schottky diodes significantly improve current density and surge current ratings

    SiC Schottky barrier diode

    Toshiba Electronics Europe has unveiled Schottky barrier diodes (SBDs) based on the company’s second-generation silicon carbide (SiC) semiconductor technology. These SBDs deliver current densities up to 50% higher than first generation devices and can handle significantly higher forward surge currents. Use of SiC se
    . . . Learn More
    Date:
    05/19/2016
    MicroPower Direct's latest converters target space-constrained apps

    MI1000ERU series 10W DC/DC converter

    The MI1000ERU series, a family of 10W DC/DC converters, is now available from MicroPower Direct. These high performance power converters are designed to provide the model selection, long field reliability, economy and high performance features required for a wide variety space critical applications. Twenty models ope
    . . . Learn More
    Date:
    05/18/2016
    Analog Devices' AD7768 8-Channel, 24-Bit, simultaneous sampling ADC now at Mouser

    AD7768 8-Channel, 24-Bit, Simultaneous Sampling ADC

    Mouser Electronics, is now stocking the AD7768 24-bit analog-to-digital converter (ADC) from Analog Devices. The 8-channel, simultaneous sampling ADC features a sigma-delta modulator and digital filter per channel, enabling the device to perform synchronized sampling of both AC and DC signals and allowing it to
    . . . Learn More
    Date:
    05/18/2016
    Ampleon's latest GaN RF transistors empower solutions for mobile broadband

    CLF2H27LS-140 single-ended transistor

    Ampleon announced its second generation of 50 Volts 0.5 um GaN on SiC RF power transistors, dedicated for mobile broadband applications. Providing a 5 % improvement in power efficiency compared to LDMOS-based devices, and enabling high-power multiband applications, this GaN family also offers a size reduction in
    . . . Learn More
    Date:
    05/17/2016
    Toshiba increases current capability of their high-voltage intelligent power devices

    TPD4207F HV-IPD

    Toshiba Electronics Europe has expanded its HV-IPD (high-voltage intelligent power device) line-up with a 600V, 5.0A part for PWM control of BLDC motors. The TPD4207F will simplify the implementation of high-efficiency BLDC applications ranging from home appliances to industrial pumps and fans. The TPD4207F
    . . . Learn More
    Date:
    05/17/2016
    PSDcast - Ranbir Singh of GeneSIC on their latest Silicon Carbide tech

    Ranbir Singh of GeneSIC

    In this PSDcast Dr. Ranbir Singh, founder of GeneSiC, talks to Alix Paultre of Power Systems Design about their position and products in the wide-bandgap semiconductor space. GeneSiC is a pioneer and little-known IP leader in Silicon Carbide technology, and their Silicon Carbide Junction Transistor (SJT) de
    . . . Learn More
    Date:
    05/16/2016
    Exagan, a leading innovator of gallium nitride (GaN) semiconductor technology, has begun a strategic partnership to develop and commercialize GaN-on-silicon products with HIREX Engineering, a company of Alter Technology Group (TÜV NORD GROUP’s Aerospace and Electronics Business Unit). TÜV NORD is a multi-national te
    . . . Learn More
    Date:
    05/16/2016
    UltraSoC announced the latest version of its advanced semiconductor IP and software tools for SoC development, debug, optimization and hardware security. The latest release in UltraSoC’s continuous development program includes extended support for data analytics and visualization, improved performance monitoring an
    . . . Learn More
    Date:
    05/16/2016
    XP Power's latest encapsulated converters offer chassis or DIN-rail mounting

    DTE series fully-encapsulated single-output DC-DC converters

    XP Power announced the DTE series of fully-encapsulated single-output DC/DC converters. The series comprises three ultra wide input voltage range models offering 20 (DTE20), 40 (DTE40) and 60 Watts (DTE60) output power. The units are available in either a chassis mount or a DIN rail format, offering flexibility to
    . . . Learn More
    Date:
    05/16/2016
    Acopian's 288W narrow-profile DC/DC regulated supply series now UL, CE and RoHS compliant

    Narrow Profile Series of DC-DC Regulated Power Supplies

    Acopian Power Supplies, a leader in the design, manufacturing and distribution of standard, modified-standard and custom power supplies, announced that their Narrow Profile DC-DC Regulated Power Supply Series is certified to UL 60950 (Information Technology Equipment) and UL 508 (Industrial Control Equipment) Sa
    . . . Learn More
    Date:
    05/14/2016
    PSDcast - Robert DeRobertis of Vicor describes their enhanced online design tool

    Robert DeRobertis of Vicor

    In this PSDcast, Robert DeRobertis of Vicor talks to Alix Paultre of Power Systems Design about the latestest updates to their online design tool at PCIM 2016. Enabling engineers to select components and simulate them online, the new additions to Vicor's PowerBench online design center include an interactive too
    . . . Learn More
    Date:
    05/13/2016
    Tech Power Electronics extends nanocrystalline current-sense transformer range

    Nanocrystalline current-sense transformers

    Tech Power Electronics announces the release of three new nanocrystalline current sense transformers SCTN20, SCTN30, SCTN70. They are designed for power electronic applications which require a highly-accurate current measurement.  In comparison with other soft magnetic materials, nanocrystalline alloys is
    . . . Learn More
    Date:
    05/09/2016
    Stockwell Elastomerics' reinforced conductive silicone rubber gaskets now have new materials

    Stockwell Elastomerics announced the availability of new materials SNE-556-R and SNE-540-R, nickel-graphite filled silicone rubber with fabric reinforcement

    Stockwell Elastomerics announced the availability of new materials SNE-556-R and SNE-540-R, nickel-graphite filled silicone rubber with fabric reinforcement that can be die cut or water jet cut into EMI shielding gaskets with narrow cross sections. SNE-556-R is a 65 durometer conductive silicone used for EMI a
    . . . Learn More
    Date:
    05/09/2016
    Now more than ever, the blooming of the Internet of Things (IoT) has been putting emphasis on the longevity of battery life. Every IoT node demands a battery to operate. A household of two people can have anywhere from 20 to 60 batteries in use at any time, and consumers can’t be burdened with the need to ch
    . . . Learn More
    Date:
    05/07/2016
    Isolated power supply systems are prevalent in server systems, industrial applications, and telecommunication and networking equipment. In this bandwidth-hungry age of the Internet of Things (IoT), a growing number of these systems need to be efficiently powered, driving up the need for power-efficient, cost-effective so
    . . . Learn More
    Date:
    05/07/2016
    Part 1 of this article provided an overview of TT Electronics’ AEC Q200 qualified and certified transformers, which are optimized for use with a gate drive optocoupler to improve and simplify the design of isolated power supplies. This introduction looked at the theory of operation and how this impacts on ke
    . . . Learn More
    Date:
    05/07/2016
    Overvoltages and the associated high surge currents can damage, or even destroy electrical and electronic devices. Reliable overvoltage protection is therefore essential. On the basis of a new ceramic material, TDK has now developed a high-surge series of multilayer varistors that combine compact dimensions wi
    . . . Learn More
    Date:
    05/07/2016
    IDT’s F197x digital step attenuators now available from Mouser

    IDT F1975 and F1977 Digital Step Attenuators

    Mouser Electronics is now stocking the F197x 75-Ohm digital step attenuators from Integrated Device Technology (IDT). IDT F197x digital step attenuators (DSAs) are the newest additions to IDT’s Glitch-Free family of radio frequency (RF) silicon solutions. The F197x devices are ideal for applications such as ca
    . . . Learn More
    Date:
    05/06/2016
    Micropower Direct unveils compact, 8W, isolated MiniDIP DC/DC converters

    MG800xRW series

    Available immediately from MicroPower Direct, the MG800xRW series provides 8W of output power in a space saving MiniDIP package. They are specifically designed to provide the compact size, high power density, I/O isolation and model selection required by a wide range of space-critical board-level applications. Twenty one models
    . . . Learn More
    Date:
    05/06/2016
    Electronics distributor Newark element14, together with components manufacturer Eaton, is launching a custom design service for electrical rocker switches. The new Custom Switches program offers the ability to create tailor-made Eaton NGR and SVR Rocker Switches in a variety of colors with custom logos and imaging.
    . . . Learn More
    Date:
    05/06/2016
    Infineon to launch iMotion modular application design kit at PCIM

    iMotion Modular Application Design Kit

    At PCIM, Infineon Technologies will launch its iMotion Modular Application Design Kit (MADK). The compact and flexible evaluation system provides a scalable design platform for 3-phase motor drives in the range from 20W to 300W. It includes controller and power boards – sensor-less or optionally with sensors. Using the kit,
    . . . Learn More
    Date:
    05/05/2016
    Wuerth Elektronik eiSos expands its family of FPC connectors

    WR-FPC back-lock dual-contact ZIF plug-in connector

    There are many interesting applications for flexible printed circuits and flat-flex cables, but there’s one problem they all have in common: FFCs and FPCs need a reliable connector base. Wuerth Elektronik eiSos has now extended its family of WR-FPC products by a back-lock dual-contact ZIF plug-in connector. The simple-to
    . . . Learn More
    Date:
    05/04/2016
    TI’s 65-V micro-power buck converters claim industry’s lowest quiescent current

    65-V, 150-mA synchronous DC/DC buck converters

    Texas Instruments introduced two 65-V, 150-mA synchronous DC/DC buck converters with the industry’s lowest 10.5-uA quiescent current (IQ) for powering factory automation and automotive sensor applications requiring high efficiency. The industrial-grade LM5165 and automotive-grade LM5165-Q1 micro-power step-down reg
    . . . Learn More
    Date:
    05/04/2016
    Wuerth's REDline Power Boxes offer custom configuration in a standard housing

    Wuerth's REDline Power Boxes offer custom configuration in a standard housing

    A novel approach to enabling power distribution, signal transmission, and function management in commercial vehicles, the REDline Power Box family is the name of the new system solution from Wuerth Elektronik ICS. With this series, the leading development partner and supplier of circuit-board-based central electrical sy
    . . . Learn More
    Date:
    05/04/2016
    Conductive adhesives to enable low-temperature electronics

    Rachel Gordon, IDTechEx

    Materials are needed to replace the estimated 50,000 metric tons of tin-lead solder currently used each year, but there are no "drop-in" replacements for eutectic tin-lead solder. $1.2 billion of electrically conductive adhesives (ECAs) are already selling each year, and they are becoming increasingly co
    . . . Learn More
    Date:
    05/04/2016
    Initially regarded as toys, multicopters are now serious business. From simple surveying to future delivery solutions, entire businesses are emerging around the design, supply and use of multicopters. With increased adoption comes increased regulation and the multicopter itself needs to be capable of being piloted in
    . . . Learn More
    Date:
    05/04/2016
    The term “hot swap” refers to the practice of inserting or removing modules from a powered system. Hot-swap controllers are sometimes categorized together with power distribution switches; however, there are key differences that must be understood for proper system design. A hot-swap controller uses an external se
    . . . Learn More
    Date:
    05/04/2016
    Being a Sci-Fi geek, I am a fan of the late 1950’s Hollywood “cheesy” low budget Ed Wood movies typical of this genre. One of my favorite films is “Plan 9 from Outer Space,” in which aliens come to Earth to stop humanity from building a doomsday weapon that could destroy the entire universe. However, th
    . . . Learn More
    Date:
    05/04/2016
    Allegro launches 1MHz bandwidth Hall-based current sensor IC

    ACS730 Hall-effect current sensor IC

    Allegro MicroSystems Europe announced its first-ever 1MHz bandwidth Hall-effect current sensor IC with a lightning fast 210 ns response time. The ACS730 provides an economical and precise solution for AC or DC current sensing. Allegro’s ACS730 is targeted at industrial, commercial, and communications systems. Ty
    . . . Learn More
    Date:
    05/03/2016
    Powerbox acquires Eplax, strengthening custom power offerings

    From left to right:
    Andreas Mielke – Eplax – Co-Managing Director
    Martin Sjöstrand – Powerbox C.E.O.
    Wolfgang Pape – Eplax – Co-Managing Director
    Henrik Flygar – Alder / Powerbox – Board Member

    Powerbox, one of Europe’s largest power supply companies and a leading force in optimizing power solutions for demanding applications, announced that it has acquired the privately-held German power supply manufacturer Eplax. The acquisition strengthens Powerbox custom-power capabilities, addressing its four ma
    . . . Learn More
    Date:
    05/03/2016
    Artesyn's cost-effective, long-life DIN Rail supplies suit industrial apps

    ADNB DIN rail power supply family

    Artesyn Embedded Technologies announced the ADNB series, a cost-effective addition to its DIN rail power supply family, that offers high efficiency, reliability and long life for a wide range of industrial applications. With power ratings of 40, 60 and 96 W, the new ADNB series is ideal for applications such as
    . . . Learn More
    Date:
    05/03/2016
    Rogers will be exhibiting at the upcoming Del Mar show May 4th and 5th at the Del Mar Fairgrounds in San Diego, CA. Representatives from Rogers will be exhibiting at Booth #622, with information and insight on the use of their circuit materials, including 92ML laminates & prepregs, ULTRALAM 3850HT, CLTE-XT, an
    . . . Learn More
    Date:
    05/03/2016
    Archive

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Power Systems Design is a leading global media platform serving the power electronics design engineering community. It delivers in-depth technical content, industry news, and product insights to engineers and decision-makers developing advanced power systems and technologies.

    Published 12× per year across North America and Europe, Power Systems Design is distributed through online and fully digital editions, complemented by eNewsletters, webinars, and multimedia content. The platform covers key areas including power conversion, semiconductors, renewable energy, automotive electrification, AI power systems, and industrial applications—supporting innovation across the global electronics industry.