>
>
Internet of Things

 




 

 

Internet of Things

August 2017
Telit Certifies LTE-M Module with AT&T
London – Telit announced that its tri-band, single mode ME910C1-NA is the first Telit LTE Category M1 (LTE-M) module to receive certification for operation on AT&T’s LTE-M nationwide network. Certification means IoT integrators and providers can quickly start taking advantage of the
. . . Read More
Date:
08/31/2017
PSDcast - An IoT Solution Utilizing Amazon Web Services
In this episode of the PSDCast, we're chatting with Cory Vanderpool of Magnum Energy Solutions about their Cardinal IoT solution, which is built on Amazon Web Services’ open platform ... Read
. . . Read More
Date:
08/30/2017
Mouser Electronics Now Shipping Maxim’s MAX14819 Dual IO-Link Master Transceiver for Industry 4.0
Mouser Electronics, Inc., is now stocking the MAX14819 IO-Link master transceiver from Maxim Integrated. The unique architecture of the MAX14819 reduces power dissipation by up to 50 percent and is fully compatible in all modes for IO-Link and SIO compliance to enabledesigners to incorporate intelligent sensors
. . . Read More
Date:
08/30/2017

Hearing and Motion Sensing Platform Provides Voice-Over-BLE and Sensor Fusion in One Module
Mouser Electronics, Inc., is now stocking the BlueCoin hearing and motion sensing platform from STMicroelectronics (ST). BlueCoin is an integrated Bluetooth development system that incorporates low-power, high-performance 9-axis inertial and environmental sensors and a cluster of four digital MEMS microphones
. . . Read More
Date:
08/22/2017
When Li-ion batteries age, their performance drops. Current methods still require complex instrumented laboratory-based tests to determine how quickly and to which degree this occurs. In contrast, a procedure developed by Chemnitz University of Technology now enables quick and precise diagnosis. It ensures the
. . . Read More
Date:
08/21/2017
Linear Regulators are integrated circuits that step a voltage down from a higher voltage to a lower voltage without the need of an inductor. The low dropout linear regulator (LDO) is a special type of linear regulator in which the dropout voltage – the differential between the input-to-output voltages needed
. . . Read More
Date:
08/21/2017
Arduino-Compatible Development Board Integrates Bluetooth 3.0 and GPRS Into a Single Board
Mouser Electronics, Inc., is now stocking the Wio Tracker from Seeed Studio. The Wireless Input Output (Wio) Tracker is an open source gateway that allows for faster GPS solutions for the Internet of Things (IoT) by tracking nearly any moving thing and uploading that data wirelessly. The Seeed Studio
. . . Read More
Date:
08/18/2017
Easily Integrate HSPA/GSM Connectivity with Digi XBee Cellular 3G Global Embedded Modems
Mouser Electronics, Inc., is now stocking the Digi XBee Cellular 3G global embedded modem. Designed to help original equipment manufacturers (OEMs) avoid time-consuming and expensive FCC and PTCRB end-device certifications, the modem enables engineers to quickly and easily integrate 3G (HSPA/GSM) with 2G fallback
. . . Read More
Date:
08/17/2017
Power Systems Design (PSD) Hosted & Moderated a PCIM Europe Podium Session - A Special Report

Kevin Parmenter, PSD Contributor

Opening Statements by Panel Moderator: Kevin Parmenter, PSD Contributor It was my distinct pleasure to chair a podium session at PCIM in Nuremburg Germany in May. The subject of the session was enabling next generation
. . . Read More
Date:
08/11/2017
nanoPower Boost Regulator Delivers Industry’s Longest Battery Life and Smallest Solution Size for Wearable and Consumer IoT Designs
San Jose, CA and Nuremberg, Germany—With the industry's highest efficiency and lowest quiescent current (IQ) of only 300nA, the MAX17222 nanoPower boost regulator from Maxim Integrated Products, Inc. enables the longest battery life in the smallest form factor for wearable and consumer IoT
. . . Read More
Date:
08/10/2017
In response to pressures to optimise energy efficiency throughout industry, a number of trends are emerging across the power landscape: · In the automotive sector, we are seeing increased electrification of the power train and the growing adoption of hybrid, electric, plug-in
. . . Read More
Date:
08/09/2017
Probing Tips for High-Performance, Low-Power Circuits

Figure 1. Extending the frequency and voltage range of a probe requires a front-end network of resistors and capacitors.

Low-power circuits combine high speed and low-power consumption in a single component, presenting a number of probing and testing challenges. Since many low-power devices are also high-speed systems, there is a need to test and verify their performance. Testing the low-power components for compliance with industry
. . . Read More
Date:
08/09/2017
Precise Power Integrity Measurements

Figure 1. Power rail voltages and tolerances required by ICs continue to decrease. These dynamics challenge traditional oscilloscope measurement approaches as the noise of the scope and probe system impairs the ability to make accurate measurements of small signals.

Development teams face increasing power integrity challenges. FPGAs, ASICs, and standard components semiconductor devices continue to increase in gate count. Each of the millions of gates on an integrated circuit requires current to switch. As devices can consume tens of amps and total power must be managed,
. . . Read More
Date:
08/09/2017
TVS Diode Array Maintains Critical Signal Line Impedance for High-Speed Communications Ports
RIVERSIDE, Calif. - Bourns, Inc., introduced a TVS diode array designed to provide effective surge protection in high-speed communication port and sensitive transceiver applications. The Bourns Model CDDFN10-2574N TVS diode array features a DFN10 package that uses a flow-through layout to enable minimal impedance
. . . Read More
Date:
08/08/2017
Seeed’s BeagleBone Green Wireless IoT Developer Prototyping Kit Now Shipping from Mouser
Mouser Electronics, Inc., is now stocking the BeagleBone Green Wireless IoT Developer Prototyping Kit for the Google Cloud Platform from Seeed Studio. Together with BeagleBoard.org and Google, Seeed Studio introduces an Internet of Things (IoT) prototyping kit that includes a variety of sensors and actuators
. . . Read More
Date:
08/08/2017
18-75V Ultra-wide Input Voltage DC/DC Converter URF48xxQB-100WR3 Series

MORNSUN new 100W DC/DC converter—URF48xxQB-100WR3 series

Along with the upgrading of traditional manufacturing and increasing input in industrial automation, traditional industries such as industrial control and communication industries increase their demand for medium-power
. . . Read More
Date:
08/08/2017
Ultra-Low Power PMICs Increase Battery Life and Efficiency for Wearables
Mouser Electronics, Inc., is now stocking MAX77650 and MAX77651 power management ICs (PMICs) from Maxim Integrated. These ultra-small, ultra-low-power PMICs integrate voltage regulators with a charger and current regulators to reduce external component count when designing small lithium-ion battery-operated
. . . Read More
Date:
08/03/2017
Zigbee Extender Designed for Wireless Sensor Network, Machine-to-Machine, and IoT Applications
Santa Clara, CA   Cortet by CEL announced the availability of the Cortet Z10 Range Extender (CGW-Z-010) for use in various wireless sensor network (WSN), machine-to-machine (M2M), and Internet of Things (IoT) applications. The Z10 Range Extender has been optimized
. . . Read More
Date:
08/01/2017
2.4GHz Transceivers Deliver Integrated Long-Range RF for IoT
Mouser Electronics, Inc., is now offering the SX128x 2.4 GHz transceivers from Semtech. Part of Semtech’s SX1200 line of ultra-low-power wireless transceivers, the SX128x half-duplex radio frequency (RF) transceivers are able to withstand heavy interference and transmit over long ranges, and are one of the
. . . Read More
Date:
08/01/2017

 



 Home | Site Map | Contact | Privacy Policy | Refund Policy | Terms of Service | Copyright © 2018 Power Systems Corporation, All rights reserved 
X

Join Our Newsletter

Sign up today for free and be the first to get notified.