IoT & Smart Cities
October 2020
SiTime Corporation announced that it has entered the $2 billion precision resonator market with the ApexMEMS family of MHz resonators. These new devices are the third-generation of SiTime silicon MEMS technology and are available in a variety of MHz frequencies for high volume electronics. Mobile and IoT applications su
. . . Learn More
Date:
10/28/2020
Renesas Electronics Corporation and Sequans Communications will partner to develop IoT modules based on Sequans’ Monarch LTE-M/NB-IoT platform. The modules are designed to provide IoT companies with an integrated microcontroller (MCU) plus connectivity platform that streamlines and simplifies IoT system design for
. . . Learn More
Date:
10/25/2020
Current sensing is a key requirement for the development of smart motor controls and high-efficiency power supplies. The new site features a range of controllers, resistors, and amplifiers from Microchip and Vishay, offering a single resource for designers seeking reliable resistor-based current-sensing solution
. . . Learn More
Date:
10/15/2020
TM-2220-C7 is a plug and play temperature compensated frequency reference for applications where reliable and accurate oscillator is needed without frequency jump.
Combining minimal foot print (3.2 x 1.5 x 0.8 mm), only 4 connections and outstanding performances with 1.5 µA maximum current consumption ass
. . . Learn More
Date:
10/15/2020
Offering bidirectional voltage or current regulation and bidirectional reverse current protection, the LT8228 and LTC7871 controllers provide a simple, reliable power solution for dual-battery automotive and industrial systems.
The Analog Devices LT8228, available from Mouser Electronics, is a single-phase
. . . Learn More
Date:
10/15/2020
These coplanar design optocouplers consist of an infrared LED on the input side and a phototransistor on the output side. They are characterized by a high insulation voltage of 5 kV and a stable current transfer ratio (CTR) over the entire operating temperature range. The WL-OCPT is available in five different THT a
. . . Learn More
Date:
10/15/2020
Samtec announces over 200,000 symbols & footprints for its interconnect productsNew Albany, IN and San Francisco, CA (July 28th, 2020) -- Today, Samtec -- a global manufacturer of interconnect solutions -- is announcing that it now has over 200,000 symbols & footprints for its products to accelerate the de
. . . Learn More
Date:
10/15/2020
The op amp also features near-zero drift (0.02µV/degree C, typical) over time and temperature. The chopper stabilization also addresses low frequency 1/f noise and offset voltage crossover distortion. Typical applications for the AS2333 include transducers, medical equipment, chemical detectors, and handheld test i
. . . Learn More
Date:
10/15/2020
The new ZS-Series not only expands the capacitance range and doubles ripple current capability, but is also rated at 4,000 hours endurance at 125°C. The ZS-Series brings new case sizes, keeping the same footprint (ø10mm) and introducing the 12mm in length in addition to 10x16mm.
Developed with the automotive se
. . . Learn More
Date:
10/15/2020
The POSCAP TPS series capacitors feature sintered tantalum as an anode and highly conductive polymer as the cathode. Unique to the TPS series is a compact design of only 3.5x2.8.x1.1mm and a high temperature rating of 105°C for up to 2.000 hours. The new capacitors benefit from a rated voltage of 2.5V to 6,3V and
. . . Learn More
Date:
10/15/2020
The TUNS1200 has an input voltage range of 85VAC to 305VAC and is certified to meet industrial and medical standards. Packaged in a sealed plastic case with aluminum baseplate the TUNS1200 has a height of just 12.7 mm (0.5”) and weighs less than 280 grams. Compared to existing 1kW onboard AC/DC modules, the TUNS12
. . . Learn More
Date:
10/15/2020
The TSP series is designed to provide the highest capacitance/voltage (CV) ratings in surface mount device (SMD) capacitors with its innovative stacking construction. These new capacitors are well suited and sized for use in high voltage power management applications such as buck boost converters, filtering, hold-up
. . . Learn More
Date:
10/15/2020
The 8-channel, multiplexed, successive approximation register (SAR) ADCs provide reliable performance for applications, such as rack servers, AC drive power stage modules, automotive center information displays, and mobile robot CPU boards.
The TI ADS7028 and ADS7138 ADCs, available from Mouser Electronics, featur
. . . Learn More
Date:
10/15/2020
The supplies are also compliant to EN 60601-1-2 Edition 4 for EMC, the products have a Class II input requiring no earth ground. The DTM36-C8 also meets the EU Tier 2 and DoE Level VI efficiency standards. The series is highly suited for home healthcare, hospital, clinical, dental and l
. . . Learn More
Date:
10/15/2020
An innovative manufacturing process not only makes these current sense transformers extremely small (4.7 x 4.65, 3.55 mm), but also provides better insulation. Their insulation voltage of 750 VAC, is 50 percent higher than that of market competitors. The WE-CST series type EE4.4 is suitable for a broad
. . . Learn More
Date:
10/15/2020
The winning product, HARTING's Han 1A connector series, won in the discipline "Product" (in the category "Electrical Connector"). Each year, the world’s oldest independent design organization, Hannover-based iF International Forum Design GmbH, organizes the iF DESIGN AWARD.
The Han 1A won
. . . Learn More
Date:
10/15/2020
The applications for these leading-edge devices include class D audio, synchronous rectification, solar MPPTs (maximum power point tracker), DC-DC converters (hard-switched and resonant), and multilevel high voltage converters.
The EPC2215 (8 mΩ, 162 Apulsed) and the EPC2207 (22 mΩ, 54 Apulsed) are abo
. . . Learn More
Date:
10/15/2020
Packaged in a Single In Line (SIP) type 8, the COSEL MH3 series has a reinforce isolation of 3kVAC, 4.2KVDC, complies with medical isolation standard (2MOOP (250VAC)) and ruggedized for industrial applications that might implies differential In/OUT voltage. Three input voltages (4.5V-18V ; 9V – 36V and 18V -76
. . . Learn More
Date:
10/15/2020
The 184-page catalogue presents new products and services in the area of passive components, optoelectronics, and power modules. Separate special catalogues are available for many other product categories of Würth Elektronik. All products in the new catalogue are available ex stock. Würth Elektronik is glad to
. . . Learn More
Date:
10/15/2020
This capacity doubles the 2 Mbit density designers previously were limited to. Until now developers have used lower-cost NOR Flash integrated circuits (ICs) for any 2 Mbit+ nonvolatile data set application. Because EEPROM offers performance advantages over NOR Flash, Microchip has responded to customer requests by
. . . Learn More
Date:
10/15/2020
.jpg)
Advanced Linear Devices Inc. (ALD) announced a first-to-market low power, low voltage, high-precision voltage-clamp module. The SABMBOVP family is an ideal clamping solution forcritical mission applications deployed in business, safety, and security products that are 5V or below. When these systems fail or are in
. . . Learn More
Date:
10/09/2020
Ally Winning, European Editor, PSD
Welcome to the October issue of PSD Europe. Autumn is always a busy time of year in the electronics industry. Traditionally it is show time, and most companies are gearing up for their biggest product launches and announcements. COVID-19 has ensured that all of the big conferences that usually host these announcements ar
. . . Learn More
Date:
10/01/2020
Jason Lomberg, North American Editor, PSD
We’re on month 10 – give or take a few – of the most dramatic societal upheaval in decades. No one is completely immune from the direct or tangential effects of COVID-19, but as I mentioned last month (and again on the PSDcast), our industry is only somewhat public-facing (and we were designated “essential” fr
. . . Learn More
Date:
10/01/2020
Archives
