porn porntube

Medical, Healthcare & Wellness

September 2020
Extremely Compact Isolated Auxiliary Supply for SiC-MOSFET Gate Driver

Click image to enlarge

Figure 1: Topology of a SiC-MOSFET half-bridge with highlighted parasitic inductances

With the increasing spread of high-voltage power semiconductor components build with silicon carbide (SiC) technology, which operate at switching frequencies above 100 kHz, the requirements for their gate control are becoming more and more demanding. Besides the bipolar, positive and negative driving voltages fo
. . . Read More
Date:
09/30/2020

Designing Power Supplies for Uncontrolled Medical Settings

Click image to enlarge

Figure 1: Equipment designed for clinical settings may not be suitable for home healthcare applications. Certification to the 60601-1 general standard may be acceptable,but it is critical to consider the new requirements of the collateral standard as well as the constraints of a 60601-1-1 general standard certified power converter

The recent pandemic has driven medical facilities around the world to the brink; hospital beds have been earmarked, and ultimately filled, to treat and care for Covid-19 patients while others with “less life-threatening” conditions have either been asked to wait it out or risk their own health at those same fa
. . . Read More
Date:
09/28/2020
Power Consumption in Lithium-ion Battery Packs

Click image to enlarge

Figure 1: Storage life comparison for two battery packs with different power consumption

Batteries play an important role in our day-to-day lives in powering devices that range from TV remotes to heart pumps. Conventional batteries included only the cells, but high energy capacity Li-ion batteries also include electronics that are required to keep the battery safe and often includes a user interface to
. . . Read More
Date:
09/28/2020
Shielded flat-wire coil
This coil is designed for high-efficiency DC/DC converters in automotive applications. The characteristic features of this flat-wire coil with its MnZn core are its high rated current (IR 38-47 A) and a high saturation performance. At an RDC value of 0.6 to 1.1 Ω, its resistance is lower than that of comparable c
. . . Read More
Date:
09/27/2020
Advanced H2S protection of IGBT modules enhances lifetime
Harsh environments with critical levels of H2S can be found especially in paper production, mining, wastewater and petrochemical processing as well as in the rubber industry.H2S is the most critical corrosive contaminant for power semiconductors. During operation, IGBT modules are usually heated up to high temperature l
. . . Read More
Date:
09/27/2020
CoolSiC 62 mm module opens up new SiC applications
The proven 62 mm device has been designed in half-bridge topology and is based on the trench chip technology. It opens up silicon carbide for applications in the medium power range starting at 250 kW – where silicon reaches the limits of power density with IGBT technology. Compared to a 62 mm IGBT module, the
. . . Read More
Date:
09/27/2020
Low Voltage Automotive Buck Converter with Programmable PFM/PWM
With a fully integrated 110mΩ high-side power MOSFET and 80mΩ low-side power MOSFET, it provides high-efficiency step-down DC-DC conversion from 5V and 3.3V input rails. The converter has been developed for use in automotive applications including infotainment systems, instrumentation clusters, telematics, a
. . . Read More
Date:
09/27/2020
New silicon carbide power module for electric vehicles
In the past ten years, Infineon has sold more than 50 million EasyPACK modules with different chipsets for a wide range of industrial and automotive applications. At the same time, the semiconductor manufacturer has successfully established its extensive portfolio of CoolSiC products in industrial applications.
. . . Read More
Date:
09/27/2020
High-Speed Op Amp Eliminates Oscillation from Load Capacitances
The device targets applications such as anomaly detection systems used in measurement and control equipment along with sensors that work with very small signals. The proliferation of IoT in recent years has led to a significant increase in the number of electronic components used for advanced control in a v
. . . Read More
Date:
09/27/2020
1U 1kW programmable DC power supplies
These new products further expand the TDK-Lambda GENESYS+ series, offering up to 1,000W output power in a choice of full or half-rack package sizes. The GENESYS+ series is ideally suited for bench-top or rack-mount equipment in a wide variety of OEM, industrial and laboratory applications. Ten models are avai
. . . Read More
Date:
09/27/2020
AEC-Q200-certified SMD ferrites with peak current load ratings
The respective peak-current capability of the ferrite beads is exactly specified. They are characterized by a high rated current of up to 10 A and extremely low resistances. WE-MPSA ferrite beads are available in the construction sizes 0805, 1206, 1612, 1812, 2220, and 3312 and can also in some cases be supplied
. . . Read More
Date:
09/27/2020
Motor System ICs for control of small electric motors in cars
These ICs are the world's first multiple half-bridge drivers for MOSFETs with integrated power supply and communication interfaces. "With our highly integrated Motor System ICs, system designers only need half the board space compared to existing solutions. At the same time, system designers maintain the c
. . . Read More
Date:
09/27/2020
New Ranges of Film Capacitors for Green Energy and Automotive
Constructed with an aluminum canister design, both the C44U-M and C44P-R power film series address the increasing demand for high-power conversion systems in green energy and industrial applications. These capacitors also support power conversion in en-ergy storage systems, IGBT and wide bandgap (WBG) semiconduct
. . . Read More
Date:
09/27/2020
Wireless Battery Management System for Electric Vehicles
The wBMS enables automotive manufacturers increased flexibility to scale their electric vehicle fleets into volume production across a wide range of vehicle classes. This is the first wireless battery management system available for production electric vehicles, and it will debut on General Motors’ production
. . . Read More
Date:
09/27/2020
ROHM and LEADRIVE Establish Joint Laboratory
SiC power devices have been adopted increasingly in onboard vehicle chargers and DC/DC converters. These devices provide several advantages compared to silicon-based power devices such as IGBTs. One key benefit: significantly lower losses during both switching and conduction along with being able to operate at hi
. . . Read More
Date:
09/27/2020
Integrated LIN Interface Sensor Signal Conditioner
      The single-package sensor signal conditioner (SSC) delivers best-in-class performance, increased design flexibility, and cost efficiency in a compact form factor for HVAC applications used in plug-in hybrid electric vehicle (PHEV), Battery Electric Vehicle (BEV), and Fuel-cell Ele
. . . Read More
Date:
09/27/2020
Würth Elektronik extends its switch portfolio
The 8.7 x 3.0 x 2.0 mm WS-SLSU SPDT switch is a slide switch in horizontal design, which is attached to the outer edge of the PCB as a SMT mountable component. Würth Elektronik also offers WS-TASU (6.2 x 3.0 x 3.5 mm, actuating force 160 gf), a switch for edge connection. The new miniaturized buttons, which are suitable
. . . Read More
Date:
09/27/2020
SIGA Broadens Wound Components Capability
The move follows SIGA’s acquisition of the business and assets in February of Wolverhampton-based Stabilised Transformers Limited. Their current transformer capability includes open or enclosed types of dry transformers and inductors, and extends through double wound and auto wound components, toroidal wound
. . . Read More
Date:
09/27/2020
Würth Elektronik extends its WE-CBA product family
The SMDs are AEC-Q200 qualified as part of Würth Elektronik's automotive electronics portfolio. WE-CBA features high-quality Ni-Sn electrodes, a very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. The ferrites, which are available in various specifications, are ideally
. . . Read More
Date:
09/27/2020
Power transformer maker relies on Yokogawa power analyzer
Founded in 1959, SEA supplies high-value assets which are expected to provide a return over decades. Quality, durability, safety and reliable performance are therefore key characteristics that customers are looking for when they specify a new transformer or reactor. Transformers play a crucial role in the transmission
. . . Read More
Date:
09/27/2020
Dev Kit Combines Wireless Power and Data Transmission
Although it was already possible to transfer data from the receiver device to the charging station, bidirectional data transfer can now be combined with the charging process. During wireless power transmission, the device and charging station exchange data through amplitude and frequency modulation. Würth Elekt
. . . Read More
Date:
09/27/2020
Small, low-power 3D magnetic sensor opens up new designs
With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor opens up new design options. Due to the small WLB-5 package (1.13 mm x 0.93 mm x 0.59 mm) and its low current consumption of 7 nA in power-down mode, the new magnetic sensor is also suitable for use
. . . Read More
Date:
09/27/2020
Upgrade to DesignSpark Mechanical 3D CAD modelling software
Version 5.0 offers new features, enhancements and customisation options that have been developed following feedback from users. The new release coincides with the 10-year anniversary of DesignSpark. Developed in conjunction with Ansys Inc., the leading provider of flexible and affordable 3D modelling software
. . . Read More
Date:
09/27/2020
PSDcast – Using Optical Sensors to Fight COVID-19

Gabriele Fulco with Omron Electronic Components Europe

Touchless solutions are both quicker and more efficient, and they happen to dovetail perfectly with our newfound appreciation for personal space and avoiding germs whenever possible .... Read More Omron Electronic Components Europe
. . . Read More
Date:
09/25/2020
Richardson Electronics Offers GA High-Energy Capacitors
Richardson Electronics, Ltd. announced today the availability of General Atomics Electromagnetic Systems' high-energy capacitors for pulse power. General Atomics' high-energy capacitors for pulse power are exceptionally reliable and capable of handling even the most demanding applications. Solutions are availab
. . . Read More
Date:
09/24/2020
Fanless Power Supplies Introduced by Advanced Energy
Advanced Energy Industries, Inc. announced the availability of its Excelsys CS1000 fanless power supply series. Delivering up to 1000W with no fans, this convection cooled family of highly efficient power supplies eliminates acoustic noise, vibration and the need for baseplate cooling, making them lightweight an
. . . Read More
Date:
09/24/2020
AVX Expands its Range of Board-to-Board Battery Connectors
AVX Corporation extended its well-proven range of board-to-board battery connectors with the addition of the new 9155-250 Series, which — like the rest of the 9155 family — delivers high-reliability electrical and mechanical connectivity in harsh, high-temperature medical, industrial, networking, and consumer el
. . . Read More
Date:
09/24/2020
Silicon power transistors with wide bandgap-like performance
The claim is made by developer Search For The Next (SFN). The first devices to use Bizen are members of the QJT (Quantum Junction Transistor) family which will include three parts rated at 1200V/75A, 900V/75A and 650V/32A, available in the industry-standard TO247 or TO263 power MOSFET packages. Of extreme signif
. . . Read More
Date:
09/22/2020
Illuminated Keyswitch Offering w/ Tactile Feedback Version
C&K has developed an illuminated keyswitch series that offers smooth, positive tactile feedback with a clear tactile sound for superior ergonomics and ease of use. The D6 Series illuminated keyswitch features an integrated LED, reducing costs and simplifying the design of the illumination path. As a result, th
. . . Read More
Date:
09/18/2020
ams Ultra-Thin Sensor w/ Blood-Oxygen Monitoring Capability
ams introduces the industry’s thinnest dedicated sensor for blood oxygen saturation (SpO2) measurement, bringing the capability to remotely monitor this vital sign to small consumer products such as earbuds, smart watches and wristbands, as well as to medical devices such as patches and oximeters.  The high perf
. . . Read More
Date:
09/18/2020
TDK Announces Availability of Ultrasonic ToF Sensor Platform
TDK Corporation announces the worldwide availability of the Chirp CH101 ultra-low power integrated ultrasonic Time-of-Flight (ToF) range sensor platform solution, which includes the CH101 MEMS sensor, sensor modules, and developer kits. Chirp’s MEMS ultrasonic technology leverages a proprietary Time-of-Flight (T
. . . Read More
Date:
09/17/2020
AVX/Ethertronics' High-Efficiency Patch Antenna Portfolio
AVX Corporation announced its extensive portfolio of high-performance, high-efficiency patch antennas optimized to satisfy demanding connectivity and miniaturization requirements in wireless applications throughout the automotive, industrial, networking, medical, consumer electronics, energy, and transportation in
. . . Read More
Date:
09/14/2020
Single-Phase EMC Filter Designed for Control Equipment
Schaffner reintroduces the FN2415 - single-phase EMC filter for control equipment with extended capabilities. Large and complex machine tools with multiple driving axes and very long motor cables can be subjected to major reliability problems caused by internal coupling of interferences from the drive system to
. . . Read More
Date:
09/14/2020
RECOM Power's RACM60 AC/DC Power Supplies Ship from Sager
Sager Electronics is now stocking RECOM Power’s RACM60 Series 60W AC/DC power supply.   RECOM Power's RACM60 series are 2" x 3" medical-grade, open-frame AC/DC converters that provide 4kVAC/1min reinforced isolation. They have an ambient operating temperature range of -40°C up to 55°C and up
. . . Read More
Date:
09/11/2020
Low-cost DC-DC converter ranges
They all focus on a simple and effective design approach which is unique to those Traco Power Products. By innovative engineering we have come up with an electrical design which minimizes component and labor costs. Key focus of those designs was to maximize the amount of automatization of the manufacturing process.
. . . Read More
Date:
09/07/2020
What are the advantages of SiC-based designs and how can you implement them?

Click image to enlarge

Figure 1 Technology positioning – Si, SiC and GaN

The global trends - such as digitalization and energy efficiency - that have emerged and accelerated in the past few years pose new challenges to the manufacturers as well as the semiconductor market. Developing power semiconductor devices that contribute to highly efficient power management systems is on the ag
. . . Read More
Date:
09/03/2020
Murata's MICS for Diagnosis, Monitoring and Reporting
Murata Electronics announced the availability of the Type 1RM ultra-small Medical Implant Communication System (MICS) band radio module. The LBAA0PC1RMH298 is designed for use in devices with data-intensive wireless capabilities that are used to diagnose, monitor, report, and provide warnings in support of
. . . Read More
Date:
09/02/2020