Product News
    Automotive Products
    LCS series thin-film resistors

    Low ohmic value current-sensing resistors from TT reduce design footprint

    10/05/2016

    TT Electronics, a leading provider of engineered electronics for performance critical applications, launched the LCS series of thin-film resistors. For sensing and measurement of DC and AC currents in the sub-3A range, the resistors bring precision thin film resistor performance into the field of low ohmic values for use in very accurate current sensing applications. Most thin film chips have a minimum value in the range of one to 10Ω, but TT Electronics’ LCS series uses a proprietary technology to extend this down to 100mΩ. The resistors also feature low sensitivity to temperature variations.

    Aimed at designers of power supplies, battery monitoring, process control and point of load converters, the LCS resistors will find acceptance for use in market sectors such as industrial, medical, instrumentation and IT.

    The resistors offer a level of precision of ±0.5% and ±50ppm/°C, providing higher precision and temperature stability of current measurement. While there are currently a few thin film chip products below one ohm that use the nickel phosphorus material traditionally used for low value films, TT Electronics’ proprietary LCS film system delivers lower TCRs (temperature coefficient of resistance) in the hundreds of milliohms range.

    Available in five sizes from 0603 to 2512, LCS resistors feature high power ratings, e.g. 1W for 2512, which is comparable to thick film ratings. This also enables smaller footprints to be used. Enhancing reliability and reducing field failures in industrial applications, LCS also feature anti-sulphur terminations.

    A major factor driving the demand for this type of product is the growth of battery powered equipment. The proprietary thin film technology of TT Electronics’ LCS bridges the gap between the ohmic values offered by bulk metal chips and those of conventional nichrome thin film chips. Whilst thick film chips are also available in this very low ohmic range, LCS offers superior precision, offering the lowest TCR for precision current sensing available in the 0.1 to 1 Ω range.

    LCS series resistors

    TT Electronics

    Related

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Published by Power Systems (PSD) serves all aspects of the Power Electronics market including but not limited to Power Conversion, Power Management, Intelligent and Embedded Motion, Automotive, Renewable Energy, Energy Efficiency and Lighting. PSD is published 10x per year in English with separate print editions for Europe and North America and is published 6x per year in China. PSD Apps are available for Android & iOS. Additionally qualified power engineering professionals may subscribe and receive PSD daily PowerSurge newsletters.