Powering Embedded Systems

    April 2020
    Integrated Active Clamp Flyback Controller range expanded
    Silanna Semiconductor focuses on the ultimate Power Management challenges with best in class power density and efficiency that delight customers with unprecedented BoM savings. First announced at APEC 2019, Silanna Semiconductor has delivered on the customer expectations and market penetration of Active Clamp F
    . . . Learn More
    Date:
    04/29/2020
    Compact, low ESR Aluminum Electrolytic Capacitors
    Available from a rated voltage of 6.3VDC to 100VDC, the FN series offers wide capacitance values (10µF up to 1800µF), which are between 20% and 80% higher than the long-running FK series. With 2.000 hours lifetime at a rated temperature range from -55°C to +105°C and low ESR feature, the FN series is the so
    . . . Learn More
    Date:
    04/29/2020
    Pre-Switch appoints Foxy Power to boost sales
    Founded in 2016, Pre-Switch has overcome the previously-insurmountable challenges of implementing soft-switching in DC/AC systems with varying input voltage, temperature and load conditions. Pre-Switch uses AI to constantly-adjust the relative timing of elements within the switching system required to force a re
    . . . Learn More
    Date:
    04/29/2020
    600W fanless AC-DC power supplies
    The ultra-compact power supplies deliver full load power under a wide range of conditions without additional cooling. The UCH600 series is ideal for use where no forced air is available, or fan noise or the ingress of dirt is undesirable. This includes medical devices, as well as those requiring BF patient pro
    . . . Learn More
    Date:
    04/29/2020
    Mouser adds Excelsys Low Voltage Power Supplies
    Through the agreement, Mouser Electronics is now stocking Excelsys low-voltage power supplies. The Xsolo ultra-compact, single-output power supplies provide 500 W in a convection-cooled chassis or up to 1008 W in an enclosed, fan-cooled chassis. Offering an output current range of 10.5 A to 42 A a
    . . . Learn More
    Date:
    04/29/2020
    Linear Mux/DeMux ReDriver with Integrated USB-C Detector
    Offering 1:2/2:1 mux/demux functionality, the ReDrivers can be used to extend the reach of USB signals running across rigid or flexible PCBs in gaming consoles, laptops, desktop computers, tablets, and other consumer applications. As the speed of serial buses, such as USB, continues to increase, overcoming sign
    . . . Learn More
    Date:
    04/29/2020
    Toshiba launches two new 80V N-channel power MOSFETs
    Both devices are suited to a wide range of power applications where low-loss operation is important, including highly efficient AC-DC and DC-DC conversion in data centres and communication base stations as well as a broad range of motor drive equipment. Both the TPH2R408QM and TPN19008QM are 80V U-MOSX-H prod
    . . . Learn More
    Date:
    04/29/2020
    Lower TCR - Higher Precision Resistors
    The series also features a lower temperature coefficient of resistance than the entire existing product line up.   Industrial relevance   The metal glaze thick film resistive element and three layers of electrodes are an essential characteristic for this group of resistors - and guarantee a state-o
    . . . Learn More
    Date:
    04/28/2020
    Its accuracy in the measuring range -40 to 125°C is ±0.5°C, while in the range -10 to 60°C it goes down to ±0.25°C. Applications extend from PCB temperature monitoring and system monitoring for power supplies, heating, ventilation, air conditioning and cold chain monitoring, to sensor technology in indus
    . . . Learn More
    Date:
    04/28/2020
    Automotive-compliant CMOS Clock Buffers
    The buffers are designed for low power operation in ambient temperatures of up to 105°C, as found in advanced driver-assistance systems (ADAS), infotainment applications, and automotive gateways. Increasing sophistication of automotive electronics has led to more complex system clock trees. The increased number of cl
    . . . Learn More
    Date:
    04/28/2020
    Rugged flat flex cable to PCB connection system
    CrimpFlex complies with the most rigorous electrical and mechanical requirements. CrimpFlex contacts ensure excellent mechanical retention and electrical contact by piercing the flat-flex cable conductor in 6 points; this is the basis for the Nicomatic patent, and the contacts can pierce cable materials including polyester,
    . . . Learn More
    Date:
    04/28/2020
    600W half brick DC-DC converter certified to EN 62477-1
    This extends the PH-A280 series of 200 to 425Vdc input power modules from 50 to 600W. The new 24V output model is designed for data communications, power transmission and renewable energy applications utilising a 380V HVDC (High Voltage Direct Current) input. The PH600A280-24 model is rated at 24V 25A and h
    . . . Learn More
    Date:
    04/28/2020
    Ultrasmall gate-driver IC with TDI for high power density
    The new device (1EDN7550U) is housed in an ultrasmall (1.5 mm x 1.1 mm x 0.39 mm) 6-pin leadless TSNP package. Infineon's gate-driver ICs with TDIs are key to high-power-density and high-efficiency designs at a lower system cost compared to alternative solutions. The TSNP package (1EDN7550U) occupies a PCB-area fi
    . . . Learn More
    Date:
    04/28/2020
    PCB-mount current transducer has high stability and accuracy
    With a footprint of 64.9 x 60mm, a height of 32mm and light weight of 250g, this compact device is suitable for 1U power supplies and other space-constrained applications. Benefitting from Danisense's closed-loop, compensated Fluxgate technology which provides a fixed excitation frequency and second harmonic zero fl
    . . . Learn More
    Date:
    04/28/2020
    SIMO Power Management IC Cuts Solution Size by Half
    This next-generation SIMO PMIC delivers 3 outputs with just one inductor at 91 percent efficiency, which is 16 percent greater than traditional 4-chip systems. With significantly reduced solution size, system designers can pack more functionality in their applications such as wearables, hearables and other compa
    . . . Learn More
    Date:
    04/28/2020
    Rear Lamp 4ch Linear LED Drivers designed for Motorcycles
    The adoption of automotive-grade LED lamps is advancing in terms of power savings and design flexibility, while the number of lamps and brightness levels are increasing significantly. Vehicle manufacturers demand simpler circuits for rear and license plate lamps in order to reduce costs and shorten development time.
    . . . Learn More
    Date:
    04/28/2020
    Available in single or dual output options, the PUC-2B series delivers an output power of up to 2W, with no minimum load required. The new family of isolated, unregulated DC/DC converter modules incorporates features such as output short-circuit protection and reinforced insulation. Housed in a compact SIP7 pack
    . . . Learn More
    Date:
    04/28/2020
    PCIM Europe 2020 to take place digitally
    The event had already been postponed from May to 28 – 30 July 2020, and will now take place again next year. The virtual format will offer a digital alternative for knowledge transfer in early July 2020.   According to the Federal government's guidelines dated 15 April 2020, all major events are prohibited in G
    . . . Learn More
    Date:
    04/22/2020
    42 V, 2 A/3 A Peak Synchronous Step-Down Regulators with 2.5 µA Quiescent Current and Ultralow EMI Emission

    Figure 1. Ultralow EMI emission LT8609S 12 V to 5 V synchronous step-down converter

    The LT8609, LT8609A, LT8609B, and LT8609S are synchronous monolithic step-down regulators that feature a wide 3 V to 42 V input range. This device family is optimized for applications requiring low EMI, high efficiency, and a small solution size—suitable for demanding automotive, industrial, computing, an
    . . . Learn More
    Date:
    04/05/2020
    Archive

    Electromagnetic Compatibility

    Sep 30,2025
    Adrian Stirn / Editor: Gerhard Stelzer, Würth Elektronik eiSos

    Molded Inductors

    Mar 31,2025
    Annika Frankemölle, Alexander Lang / Editor: Gerhard Stelzer, Würth Elektronik

    Power Systems Design

    146 Charles Street
    Annapolis, Maryland 21401 USA

    Power Systems Design

    Power Systems Design is a leading global media platform serving the power electronics design engineering community. It delivers in-depth technical content, industry news, and product insights to engineers and decision-makers developing advanced power systems and technologies.

    Published 12× per year across North America and Europe, Power Systems Design is distributed through online and fully digital editions, complemented by eNewsletters, webinars, and multimedia content. The platform covers key areas including power conversion, semiconductors, renewable energy, automotive electrification, AI power systems, and industrial applications—supporting innovation across the global electronics industry.