Powering Embedded Systems

June 2020
Han-Modular Flexbox: Modular connectors for energy chains
The interface has been developed so longer, moving cable runs for machines and machine modules are easier to install and maintain. The Han-Modular Flexbox makes it possible to sub-divide energy chains into flexibly manageable and easily replaceable segments. The modular housing concept replaces the previou
. . . Learn More
Date:
06/30/2020
Modular evaluation platform for discrete CoolSiC MOSFETs
Its centre comprises a motherboard with interchangeable drive cards.  The drive options include a Miller clamp and a bipolar supply card; additional variants will be launched in the near future. In shortening time-to market for a variety of applications, this portfolio will help paving the way for silicon car
. . . Learn More
Date:
06/30/2020
ROHM adds Ultra-Compact LED Driver for automotive LED lamps
In response to the growing demand for higher levels of reliability, safety, and increased flexibility for the LED’s thermal management in combination with an ultra-compact design, ROHM developed the industry-leading Automotive LED Driver BD18336NUF-M. “ROHM is embracing the market trend towards miniaturization with its new
. . . Learn More
Date:
06/30/2020
Würth Elektronik introduces its WE-LHMD high-current inductor
Thanks to their iron powder cores, the high-current inductors for audio applications (available in 1008 and 1213 packages) display stable behaviour at high peak currents. The WE-LHMD features the 2-in-1 design from non-coupled inductors and is therefore suitable for compact BTL (Bridge-Tied Load) applications.
. . . Learn More
Date:
06/30/2020
Würth Elektronik introduces its WE-HIDA high-current inductor
The high current inductor is characterized by low core losses, very low DC resistances from 2.5 mΩ to 14.8 mΩ and high saturation currents.  WE-HIDA is not only available as a single inductor, but also in 2-in-1 designs (package sizes 1415 and 1521) for compact BTL (Bridge-Tied-Load) applications.
. . . Learn More
Date:
06/30/2020
Chip-set enables higher performance AI
A driver, MCD4609, and a pair of MCM4609 current multiplier modules supply up to 650A continuous and 1,200A peak. Owing to their small footprint and low profile (45.7mm x 8.6mm x 3.2mm), current multipliers are placed close to the processor enabling reduced power distribution network (PDN) losses and higher pow
. . . Learn More
Date:
06/30/2020
MOSFET Gate Driver Switch Intelligent Power Devices
The TPD7106F and TPD7107F can be used to control the conduction and shut-off of currents being supplied to automotive electronic control units (ECUs), including junction boxes and body control modules. They are also suited to use in power distribution modules and semiconductor relays. When combined with
. . . Learn More
Date:
06/30/2020
€10.3M project for the most energy-efficient GaN power modules
CGD leads the European funded GANEXT project under the PENTA Programme, targeting the design and development on highly efficient, highly compact prototypes of next generation Gallium Nitride power modules, for low and high power applications. The GaNext Penta project is undertaken by a powerful consortium with co
. . . Learn More
Date:
06/30/2020
Advanced, secured NOR Flash memory
Based on Semper NOR Flash’s field-proven and robust smart memory architecture, Semper Secure NOR Flash is the first memory solution to combine security and functional safety in a single NOR flash device to deliver the security, safety, and reliability required for the most advanced connected automotive, industri
. . . Learn More
Date:
06/30/2020
Autonomous Wireless Charging Solutions Increase Uptime
As robotic fleets reshape logistic, delivery and inspection industries, the demand for more efficient and flexible charging solutions is increasing while the feasibility for these fleets to be managed manually and recharged ad hoc by a 24/7 rotation of personnel is decreasing. The next step is toward enhanced au
. . . Learn More
Date:
06/30/2020
Wide Selection of High-Frequency Connectors
In 174 pages, the "Coax Connectors" English language catalog presents nine product groups. The new product families of SMB and SMP connectors is the highlight. The following product families are featured in the coaxial catalog available today: SMA and Reverse Polarity SMA, MCX and MMCX, SMP and SMB Mor
. . . Learn More
Date:
06/30/2020
SiGe rectifiers offer high efficiency and thermal stability
The rectifiers combine the high efficiency of their Schottky counterparts with the thermal stability of fast recovery diodes. Targeting automotive, communications infrastructure and server markets, the new 1-3 A SiGe rectifiers are of particular benefit in high-temperature applications like LED lighting, engine co
. . . Learn More
Date:
06/30/2020
Compact intelligent Toshiba power device with 600V rating
With its rated power supply voltage (VBB) of 600V, the TPD4162F can be used for any applications with input signals in the range 200 to 220VAC. The new IC contains a PWM circuit, 3-phase decoder, level shifting high-side driver and low side driver with embedded IGBTs and FRDs. This allows direct drive of brushle
. . . Learn More
Date:
06/30/2020
Würth Elektronik Wireless Power Transfer Coil WE-WPCC WPT/NFC
The new device anables the combination of a charging station for smartphones with identification and payment functions. Other new additions to the world's largest range of wireless power transfer coils include a high power coil (WE-WPCC 760308101311) with 400 W output and a "flat" version, two coils whose respective heigh
. . . Learn More
Date:
06/30/2020
300W non-isolated, buck-boost DC-DC converters output 9.6V to 48V
The output voltage of these step-up and step-down converters can be adjusted from 9.6 to 48V and accept a wide range input voltage of 9 to 53V. The converters seamlessly transition from buck to boost mode operation without disruption in performance. The i7C 8A series can be used to derive additional high-power outputs
. . . Learn More
Date:
06/30/2020
Low Dropout Regulator Offers High PSRR
The device meets the need for voltage regulation in noise-sensitive, battery-operated devices such as wearables, portables, and connected sensors. The AP7353 is available in X1-WLB0707-4 (Type A1) and X2-DFN1010-4 (Type B) packages, each measuring less than 1mm on each side. These dimensions result in a sma
. . . Learn More
Date:
06/30/2020
CoolSiC MOSFET 1700 V SMD offers best efficiency
Having added 650 V to the portfolio earlier this year, the company is now launching the 1700 V class with its proprietary trench semiconductor technology. Maximizing the strong physical characteristics of silicon carbide (SiC), this ensures that the new 1700 V surface-mounted devices (SMD) offer superior reliabi
. . . Learn More
Date:
06/30/2020
Reliable, Durable, Decentralised Power Supplies
Decentralisation of system components has proven to be an important factor in modern system planning as it simplifies installation, enables expansion and reformatting of systems, and simplifies maintenance. In addition, conventional control cabinets can be replaced by smaller versions or even removed completel
. . . Learn More
Date:
06/30/2020