Lighting & Illumination

April 2021
Seoul Semiconductor LEDs Selected for Horticultural Applications
Innovative Growers Equipment has selected Seoul Semiconductor ultraviolet (UV), white, and deep red (DR) LEDs for its latest lighting product, the ILE Radiance Spectrum UV6C horticultural lighting fixtures. The fixtures use the unique spectral properties of Seoul’s LEDs to produce an enhanced broadband spectrum of
. . . Learn More
Date:
04/30/2021
'Twisting' Atomic Materials may Convert Light into Electricity

Photo shows Vivek Aji (left) and Nathaniel Gabor in the Quantum Materials Optoelectronics Lab at UC Riverside.

A pair of physicists at the University of California, Riverside, are aiming to convert light falling on atomically thin semiconductor materials into electricity, having received more than $582,000 in funding from the U.S. Department of the Army. Nathaniel Gabor and Vivek Aji, both associate professors of physics and astro
. . . Learn More
Date:
04/30/2021
CISSOID expands its SiC Intelligent Power Modules Platform
The new modules are intended for use in e-mobility tailored for lower switching losses or for higher power. The company is also introducing a module based on a lightweight AlSiC flat baseplate that meets the demand for natural convection or forced cooling in aerospace and in dedicated industrial applications
. . . Learn More
Date:
04/27/2021
Würth Elektronik publishes Web Application Guide
The easy-to-use tool offers the most common switching regulator and interface topologies - for example buck converters, CAN or Ethernet interfaces - and an overview of which components are required for them. From here, there is a direct link to ordering free component samples. With the help of clear and delibera
. . . Learn More
Date:
04/27/2021
650 V GaN FETs enable 80 PLUS Titanium-class power supplies
The new family offers significant performance advantages over previous technologies and competitive devices. With RDS(on) performance down to 35 mΩ (typical), the new power GaN FETs target single phase AC/DC and DC/DC industrial switched mode power supplies (SMPS), ranging from 2 kW to 10 kW, especially server and
. . . Learn More
Date:
04/27/2021
RS Components extends global franchise agreement with STMicroelectronics
This new phase in the relationship between the two companies will result in a substantial increase in the breadth and volume of ST products stocked by RS. ST will also feature regularly on the award-winning DesignSpark online engineering hub. “RS has been very successful in building up a vibrant internatio
. . . Learn More
Date:
04/27/2021
Mouser Electronics Adds 31 New Manufacturers in Q1
Mouser continues to focus on the breadth of its product offering, with new manufacturers in product categories such as embedded, connectors, optoelectronics, semiconductors, and hardware. Among the new manufacturers, over half are in the embedded space, as Mouser continues to expand its Internet of Things (IoT)
. . . Learn More
Date:
04/27/2021
White Chip LEDs with High Luminous Intensity in a 1608 Size
The products are optimized for applications requiring high brightness white light emission, such as IoT devices, drones, and other battery equipped applications. In recent years, high luminous intensity (2.0cd) white LEDs are being increasingly adopted to improve visibility in a range of applications in the con
. . . Learn More
Date:
04/27/2021
Multi-Directional Spring Contacts
These new surface mount components are capable of supporting both horizontal and vertical connection orientations, but come in smaller size formats than were previously available. The S1961-46R has a 3.55mm height, while the S1971-46R has a height of 4.55mm. Although there are a multitude of vertical-only spri
. . . Learn More
Date:
04/27/2021
Flexible gate driver families now with reinforced isolation
Both families now offer variants with superior reinforced isolation for higher application safety and long operating life. The new family members are VDE 0884-11 certified. With 8 mm wide-body packages, both families are suitable for applications with demanding isolation requirements including industrial drives, solar
. . . Learn More
Date:
04/27/2021
RS Components extends its range of RS PRO sensors
RS Components has announced the expansion of its popular RS PRO sensors range to give customers a comprehensive choice of sensors for use in factory automation applications. The range consists of high-quality sensors and accessories that deliver excellent reliability and great value. Ultrasonic proximity senso
. . . Learn More
Date:
04/27/2021
Bulgin Updates Data Connectivity Product Offering
This ensures that they remain aligned with the latest standards and protocols. This means that customers have access to industry-leading solutions that support elevated data transfer rates and deliver superior levels of signal integrity. Bulgin’s data connectivity suite includes the following key products:
. . . Learn More
Date:
04/27/2021
Power Delivery Software Enables USB System Differentiation
By merging their proprietary code with Microchip’s fully functionable PD stack, designers have the ultimate flexibility for creating differentiated product offerings while choosing from a wide variety of Microchip SmartHubs, microcontrollers (MCUs) and standalone PD solutions for their USB systems. Microchi
. . . Learn More
Date:
04/27/2021
Mascot further extends Blueline power supply line-up
The 3920 is medically certified in accordance with EN 60601-1 edition 3.1 (safety) and EN 60601-1-2 edition 4 (EMC) and has been designed to meet global power conversion requirements. Working with universal AC line voltages from 90V to 264V, the high-efficiency 3920 offers continuous output power up to 180W
. . . Learn More
Date:
04/27/2021
DC-DC buck converters deliver 750W in a small footprint
The output voltage of these 24V nominal input step-down converters can be adjusted from 3.3V to 18V with a maximum current of 45A. The i7A models can be used to derive additional high-power outputs from a 24Vdc power supply, at a lower cost and higher efficiency than isolated DC-DC converters. These very
. . . Learn More
Date:
04/27/2021
Digital DC/DC converter delivers 1300 W in half-brick package
With telecoms infrastructure shifting to 5G, the RFPA is becoming increasingly power-hungry, and RF Power Amplifier designers are moving from LDMOS to Gallium Nitride (GaN) Transistors. Overall, there’s a demand for highly efficient DC/DC converters, that can deliver the power required in a compact package. The BMR6
. . . Learn More
Date:
04/27/2021
Updates on IQD’s IQRB-3 rubidium oscillator available
Following the recent releases of new products in this portfolio, the ICPT-1 and the IQRB-4, and an extensive update on the IQRB-1, IQD is now able to share new data on the IQRB-3. The IQRB-3 can be synchronised to a 1 PPS signal as well as used as a 1 PPS source. Additionally, it offers superb phase noise perfo
. . . Learn More
Date:
04/27/2021
16-Channel, Mixed-Signal Front-End Digitizer
These applications include phased array radars, electronic warfare, and ground-based SATCOM (satellite communications). The new digitizer includes four AD9081 or four AD9082 software-defined, direct RF sampling transceivers. It is designed to accelerate customer development by providing reference RF signal cha
. . . Learn More
Date:
04/27/2021
R-TOOLS MAXX, the Next Generation Heat Sink Calculator
R-TOOLS MAXX is a no charge, on-line simulation software that allows users to model the optimum air-cooled heat sink solution tailored to their project requirements. It is completely interactive and available online 24/7. Users can enter the boundary conditions, heat source details, and choice of flow boundaries f
. . . Learn More
Date:
04/27/2021
Compact, conduction cooled 75W AC-DC power supply module
The new supplies require no external circuitry for operation or EMC compliance. Models in the new ASB75 series offer compact, fanless power with baseplate cooling for applications such as information technology equipment (ITE), Internet of things (IoT), general industrial and harsh or rugged applications. The comple
. . . Learn More
Date:
04/27/2021
High Density, Modular Power Delivery Networks Optimize Mobile Robot Performance

Click image to enlarge

Figure 1: The two robotics platforms are vastly different sizes, but their power delivery networks have much in common. A modular approach offers flexibility in the initial designs and typically faster delivery of subsequent power systems design

The range, productivity, and flexibility of a mobile robot can be enhanced by the optimal design of its power delivery network (PDN). There are complex power system design and architecture considerations in such PDNs due to the variation in the battery power source voltage plus the broad variety of loads that ma
. . . Learn More
Date:
04/26/2021
ROHM Introduces White Chip LEDs with High Luminous Intensity
ROHM Semiconductor introduced their new CSL1104WB ultra-compact, high luminous intensity white chip LEDs. The products are optimized for applications requiring high brightness white light emission, such as IoT devices, drones, and other battery-equipped applications. In recent years, high luminous intensity
. . . Learn More
Date:
04/22/2021
HiperPFS-4 PFC IC Delivers 98% Full-Load Efficiency
This combination delivers greater than 98% full-load efficiency in PC, TV, and similar applications between 75 W and 400 W.   Comments Power Integrations’ product marketing manager Edward Ong: “Designs using HiperPFS-4 ICs show very high efficiency across the load range with as little as 36 mW of no-load p
. . . Learn More
Date:
04/13/2021
1.5 Amp POL switching regulators in an open frame design
This series comes in a compact SIP-3 open frame package and complements our existing POL portfolio with a series focusing strongly on a cost efficient design while maintaining our quality standards. There are 3 output voltages available: 3.3, 5.0 and 12VDC. The effective design allows full load operation up to +85°C a
. . . Learn More
Date:
04/13/2021
Science Behind Varying Performance of Different Colored LEDs

An array of multi-colored LEDs periodically arranged to give off visible light as shown above; a combination of InGaN based red, blue, and green LEDs is essential to cover lighting demands efficiently in the entire visible spectrum

Researchers from the Low Energy Electronic Systems (LEES) Interdisciplinary Research Group (IRG) at Singapore-MIT Alliance for Research and Technology (SMART), MIT's research enterprise in Singapore, together with Massachusetts Institute of Technology (MIT) and National University of Singapore (NUS) have found a m
. . . Learn More
Date:
04/12/2021
APEC 2021 Will Be Online-Only Event Due to Covid-19 Concerns
The Applied Power Electronics Conference announces that APEC 2021 will be presented as a virtual event and will take place June 14-17, 2021, on the virtual event platform, Social27. The virtual format will not only ensure the safety of our community, it will also allow: · More of our global community of power
. . . Learn More
Date:
04/01/2021
Taking Advantage of PFM with MicroModules for Space Constrained Applications

Figure 1: Block diagram of a security camera application

Space constrained applications like portable devices require especially designed DC/DC converters with a certain set of characteristics. Tight space, by definition, requires tiny DC/DC converters which have excellent thermal performance. This article digs deeper into the challenges that arise for the power supply of s
. . . Learn More
Date:
04/01/2021
Archives