Test & Measurement

June 2019
Digital Power Analyzer Simplifies Power Measurements
Irvine, CA – Adaptive Power Systems Inc. (APS) is introducing a new, single channel digital power analyzer aimed at AC and DC power measurements. These new power analyzer address a wide range of product development and test needs for single phase powered consumer and industrial products as well as DC powered eq
. . . Learn More
Date:
06/27/2019
Adaptive Power Systems' Screen-Operated Power Analyzer
Irvine, CA – Adaptive Power Systems Inc. (APS) is introducing a new, multi-channel digital power analyzer aimed at single and multi-phase AC or DC power measurements.  These new power analyzers address a wide range of product development and test needs for a wide range of consumer and industrial products as
. . . Learn More
Date:
06/27/2019
Non-Silicone-Based TIM for Burn-in and Test
Indium Corporation has added to its line of thermal interface materials (TIMs) with the introduction of HSMF-OS, a non-silicone based metal/polymer material designed for burn-in and test applications. HSMF-OS is designed for high insertion capability. Its high tensile strength and soft compliant polymer backing al
. . . Learn More
Date:
06/25/2019
Variable Drive Series for Roughness and Contour Measurements
PROVIDENCE, RI –  Mahr Inc. announced the addition of the variable-drive MarSurf VD series, which enables roughness and contour measurements to be performed on the same machine. The operator can easily and quickly change between a high-precision roughness probe system or a highly dynamic contour probe sy
. . . Learn More
Date:
06/25/2019
Tantalum Nitride Chips Offer Robust Humidity Withstanding
RALEIGH, NC – The RTAN Series from Stackpole withstands biased humidity testing at 85 degree C, 85% relative humidity, 10% rated power with very little resistance shift. In addition, the RTAN anti-sulfur materials and design is such that it will pass the rigorous ANSI / EIA-977 (method A) standard sulfur test,
. . . Learn More
Date:
06/24/2019
3W Ultra-thin Isolated Regulated Output DC/DC Converters
The new series URB/VRB-J(M)D/T-3W provides 4:1 and 2:1 ultra wide input range, features 1500VDC isolation voltage, and delivers efficiencies up to 83%. Packages are available in SMD and DIP. In addition to meeting EN62368 standards, protections for input under-voltage, over voltage, over-current, output short cir
. . . Learn More
Date:
06/17/2019
Fuji Electric 7th Generation IGBT Technology Powers Today’s High Efficiency Energy Conversion Systems

Click image to enlarge

Figure 1: IGBT cross sectional structure

Today’s Power Electronic market is driving development of compact, low-loss, and, high-reliability IGBT modules to optimize power conversion systems. In response, Fuji Electric has developed our 7th generation X-Series IGBT technology combining enhanced semiconductor chip characteristics and improved packaging str
. . . Learn More
Date:
06/16/2019
HARTING and HIROSE push infrastructure for Single Pair Ethernet
To make the new connection technology for Single Pair Ethernet a success, the technology partnership is pursuing the systematic expansion of SPE to achieve an end-to-end, complete infrastructure. This infrastructure consists of a portfolio of connectors, sockets, cables and cable sets on the component side. In
. . . Learn More
Date:
06/06/2019
Rad-Hard 16-Channel Current Driver with Integrated Decoder
The ISL72814SEH integrates the decoder, input level shifter, and 16 current driver arrays in a single monolithic IC. The device allows satellite manufacturers to significantly increase system capacity and cut solution footprint by 50 percent for their medium Earth orbit (MEO), geosynchronous Earth orbit (GEO), h
. . . Learn More
Date:
06/06/2019
Encapsulated sixteenth-brick DC-DC converters
The modules are housed in the industry-standard sixteenth-brick form factor (35.3 x 25 x 10.4mm / 1.39 x 0.984 x 0.41 in), with sealed and encapsulated packaging. This ensures their reliability when exposed to dust, moisture, severe vibration and other harsh environmental conditions. There are two variants: the PKU35
. . . Learn More
Date:
06/06/2019
Powerbox announces 105 models of DC/DC converters featuring 2xMOPP medical approvals
The PMM15, PMM20 and PMM30 are certified to the 3rd Edition of the IEC/EN/ANSI/AAMI ES 60601-1 medical safety standard and rated for the highest levels of patient protection - 2xMOPP. With a clearance and creepage distance of 8mm, a typical leakage current of 2µA and a 5,000VAC isolation voltage, the modules ensur
. . . Learn More
Date:
06/06/2019
New angled locking cable for IEC C14 Power Connectors
The newest connector in the IL13 family sets a benchmark in space limited locking situations. Due to its angled construction the connector can be beneficially used with devices standing next to a wall or in table-top applications. The connector comes in four different orientations to cater for any assem
. . . Learn More
Date:
06/06/2019
Now at Mouser: Maxim’s MAX77860 Switch-Mode Buck Charger
The MAX77860 is ideal for USB Type-C charging for single-cell (1S) lithium-ion or lithium-polymer applications, portable medical equipment, portable industrial equipment, and mobile point-of-sale devices, as well as smartphones and Internet of Things (IoT) applications. The Maxim MAX77860 step-down charger, available from
. . . Learn More
Date:
06/06/2019
10W reed relay suits high-PCB-density applications
Series 122 relays measure 12.5mm in height and are rated with a switching current of 0.5A at 10W. 3V and 5V coils are available.   Fast operate and release times, typically 150 μs or less, make Series 122 relays ideal for high speed test systems such as A.T.E. switching matrices or multiplexers.
. . . Learn More
Date:
06/06/2019
Tektronix Launches New 3 Series MDO and 4 Series MSO
BEAVERTON, Ore. -- Tektronix, Inc., introduced two new products to its portfolio with the launch of the 3 Series Mixed Domain Oscilloscope (MDO) and 4 Series Mixed Signal Oscilloscope (MSO), delivering the most powerful, versatile and easy-to-use oscilloscopes in the market.   Built on the award-winning
. . . Learn More
Date:
06/04/2019
Wideband Amplifier for 5G Test and Measurement Applications
Lowell, Massachusetts – MACOM Technology Solutions Inc. (“MACOM”) announced a new wideband distributed amplifier with the introduction of the MAAM-011238, offered in both bare-DIE and Surface Mount packaged formats. Well suited for use in 5G test and measurement (T&M) equipment, the MAAM-011238 gives system designers the agility to leverage a single amplifier for 5G applications spanning sub-6 GHz to mmW frequencies. The MAAM-011238 amplifier supports wideband operation from 100 kHz up to 50 GHz (67.5 GHz for the
. . . Learn More
Date:
06/03/2019
Archives