Available from a rated voltage of 6.3VDC to 100VDC, the FN series offers wide capacitance values (10µF up to 1800µF), which are between 20% and 80% higher than the long-running FK series.
With 2.000 hours lifetime at a rated temperature range from -55°C to +105°C and low ESR feature, the FN series is the so
Through the agreement, Mouser Electronics is now stocking Excelsys low-voltage power supplies.
The Xsolo ultra-compact, single-output power supplies provide 500 W in a convection-cooled chassis or up to 1008 W in an enclosed, fan-cooled chassis. Offering an output current range of 10.5 A to 42 A a
It works with double bandwidth to increase measuring speed. Also new is the R&S EWS-K58 multi CISPR ADP option. It precisely shows the effects of interference on digital communication systems. The option accelerates CISPR 11 tests on microwave ovens and could prevail for other product tests in the future.
The R
Offering 1:2/2:1 mux/demux functionality, the ReDrivers can be used to extend the reach of USB signals running across rigid or flexible PCBs in gaming consoles, laptops, desktop computers, tablets, and other consumer applications.
As the speed of serial buses, such as USB, continues to increase, overcoming sign
Both devices are suited to a wide range of power applications where low-loss operation is important, including highly efficient AC-DC and DC-DC conversion in data centres and communication base stations as well as a broad range of motor drive equipment.
Both the TPH2R408QM and TPN19008QM are 80V U-MOSX-H prod
Its accuracy in the measuring range -40 to 125°C is ±0.5°C, while in the range -10 to 60°C it goes down to ±0.25°C. Applications extend from PCB temperature monitoring and system monitoring for power supplies, heating, ventilation, air conditioning and cold chain monitoring, to sensor technology in indus
The buffers are designed for low power operation in ambient temperatures of up to 105°C, as found in advanced driver-assistance systems (ADAS), infotainment applications, and automotive gateways.
Increasing sophistication of automotive electronics has led to more complex system clock trees. The increased number of cl
CrimpFlex complies with the most rigorous electrical and mechanical requirements.
CrimpFlex contacts ensure excellent mechanical retention and electrical contact by piercing the flat-flex cable conductor in 6 points; this is the basis for the Nicomatic patent, and the contacts can pierce cable materials including polyester,
This extends the PH-A280 series of 200 to 425Vdc input power modules from 50 to 600W. The new 24V output model is designed for data communications, power transmission and renewable energy applications utilising a 380V HVDC (High Voltage Direct Current) input.
The PH600A280-24 model is rated at 24V 25A and h
The new device (1EDN7550U) is housed in an ultrasmall (1.5 mm x 1.1 mm x 0.39 mm) 6-pin leadless TSNP package. Infineon's gate-driver ICs with TDIs are key to high-power-density and high-efficiency designs at a lower system cost compared to alternative solutions.
The TSNP package (1EDN7550U) occupies a PCB-area fi
This next-generation SIMO PMIC delivers 3 outputs with just one inductor at 91 percent efficiency, which is 16 percent greater than traditional 4-chip systems. With significantly reduced solution size, system designers can pack more functionality in their applications such as wearables, hearables and other compa
The event had already been postponed from May to 28 – 30 July 2020, and will now take place again next year. The virtual format will offer a digital alternative for knowledge transfer in early July 2020.
According to the Federal government's guidelines dated 15 April 2020, all major events are prohibited in G
Vishay Intertechnology, Inc. introduced a new series of miniature snap-in power aluminum electrolytic capacitors that enables higher power density designs. The Vishay BCcomponents 257 PRM-SI series offers up to 20 % higher ripple current than previous-generation solutions in case sizes that are up to 20 % smaller wh
A crucial step in the engineering workflow is real-time testing with hardware-in-the-loop (HIL) simulation. It comes after system-level simulation but before a final hardware design is decided, and it's become especially important with the increased demand for renewable energy and electric and hybrid vehicles. On
The LT8609, LT8609A, LT8609B, and LT8609S are synchronous monolithic step-down regulators that feature a wide 3 V to 42 V input range. This device family is optimized for applications requiring low EMI, high efficiency, and a small solution size—suitable for demanding automotive, industrial, computing, an
Kevin Parmenter, FAE Director, Taiwan Semiconductor NA
Our industry typically classifies power applications that we can’t partition into any other segment as “industrial electronics.” This includes everything from energy-harvesting sensors to monitoring industrial machinery or a pipeline along its complete route, to the power levels needed to weld steel in ro
Mouser Electronics, Inc., announces an extended global distribution agreement with Advanced Energy to distribute Excelsys Technologies products. Through the agreement, Mouser Electronics is now stocking Excelsys low-voltage power supplies.
The Xsolo ultra-compact, single-output power supplies provide 500 W
Mahr Inc. announced a series of new Micromar Micrometers offering capabilities to perform specialized measuring tasks. Micromar 40EWR micrometers are a market-leading innovation, featuring a modern look and integrated wireless technology for data transmission. Following the recent introduction of its 40EWR-L Ra
Advanced_Energy_Xsolo.jpg)
