High-voltage applications frequently require high-voltage resistors with high accuracy for voltage division, monitoring and control. Some applications with more moderate working voltages may experience high voltage surges which may damage general purpose chip resistors.
For applications such as these,
Advanced Energy introduced the Artesyn LGA110D, a 110 amp-rated, non-isolated digital point-of-load DC-DC converter. The latest addition to the company’s LGA family, the LGA110D delivers a higher current rating at 30% higher power conversion density than any DC-DC converters in its class, making it
AVX Corporation released a new series of IP67-rated, external, dual-band Wi-Fi antennas optimized for 2.4GHz and 5GHz applications. The new X9001748 Series external, dual-band Wi-Fi antennas have a standardized, ready-to-use, RoHS-compliant design with IP67 sealing for reliable outdoor operation an
The devices feature an improved EMI immunity for automotive and industrial equipment applications requiring high-speed sensing in harsh environments, such as vehicle engine control units and anomaly detection systems for factory automation equipment.
In recent years, advancements in electrification and mounting d
Gowanda Electronics announces the introduction of a new non-magnetic RF thru-hole (leaded) inductor series – 28MG. This series was designed to address the market need for non-magnetic inductors that could achieve inductance values of up to 18 µH.
This series is ideal for use in medical imaging equipment
In the medical device space, safety and reliability are paramount. Using power supplies that meet the industry’s stringent standards is one of the core ways to help ensure these requirements are met. Helping to meet this need, ABB Power Conversion has introduced its new MPE2000AC48_200AC24 (MPE2000) rectifier, w
Their clever design purposefully integrates high performance, versatility, interoperability and regulatory compliance to fulfil evermore demanding worldwide applications.
The built-in Digital Signal Processor (DSP) supports the PMBus open standard power management protocol, which enables diagnosti
The new resistor features a standoff construction that offers an improvement over regular flip chip technology.
The FRFS0402 is ideally suited for use in telecommunication network equipment (including 5G, downhole data center, or fiber optics), medical equipment (including pace makers or hearing-
The lenses provide greater flexibility across the range of applications for thermal imaging cameras by delivering increased accuracy and precise image quality. All lenses are interchangeable and compatible with Fluke’s range of thermal imaging cameras.
Thermal imaging applications
Thermal im
Gen2 offers higher efficiency and power density levels. The outstanding performance and reliability combined with the capability of 8-inch GaN-on-Si wafer production mark Infineon’s strategic outreach to the growing demand for GaN power semiconductors. In accordance with market requirements, Gen2 will be developed
The handbook summarises tests undertaken: from temperature stability and short-term stability to supply pushing and more.
The IQRB-2 fills the gap between the IQRB-1 and the IQRB-3; the IQRB-1 delivers a superb price performance ratio, whereas the IQRB-3 offers an exceptional phase noise performa
Streamlining power system design and assuring ongoing reliability, this automotive-compliant device provides a controlled and protected power path. It is rated to handle continuous load currents of up to 1.5A. Key applications include protection of vehicle USB ports and ECU supply rails, and infotainment and telem
The output is closely matched between high-side and low-side outputs, to handle high-frequency switching of GaN enhancement-mode FETs.
Also suitable for driving N-channel silicon MOSFETs at up to 20V, the STDRIVEG600 allows the flexibility to apply up to 6V gate-source voltage (VGS) on GaN devices to e
Designed for industrial applications requiring high levels of safety, the LHP150F and the LHP300F are certified according to EN62477-1 (OVC III). The products work over a wide universal input voltage range of 85 to264VAC and have a high typical efficiency rating of 93%. The LHP150F and LHP300F are available in
They are suitable for both low and high switching frequencies. This new technology offers 40 percent improved RDS(on) and over 50 percent lower gate charge (Qg) compared to previous StrongIRFET™ devices. The higher power efficiency thus generated ensures improved overall system performance. The Infineon StrongI
The power module in a SIP-3 package represents a cost-effective solution to meet the requirements for the real-world voltage transients of a 24 V industrial power architecture. The new module operates from 16 to 36 VIN and generates a fixed output voltage of 12 V with current up to 1 A.
The FDSM
The new drivers improve the performance of multiple parallel EconoDUAL modules by 20%, allowing users to eliminate one of every six modules from power inverters and converter stacks. In addition to saving the cost of the driver and module, this reduces control complexity and costs related to modules, wiring, hardware,
The TMC6140-LA 3-phase MOSFET gate driver integrates all three bottom shunt amplifiers to provide a complete motor drive solution with 30-percent improved power efficiency, while simplifying design by reducing component count by half when compared to similar solutions.
The TMC6140-LA is optimized for performan
Renesas Electronics Corporation expanded its industry-leading environmental sensor portfolio with its first family of thermopile-based detectors with integrated optical filters for optical (NDIR) CO2 sensors. The four new single- and dual-channel analog detectors for CO2 gases deliver the industry’s best performance, qu
Powerbox, one of Europe’s largest power supply companies, and for more than four decades a leading force in optimizing power solutions for demanding applications, announces it has consolidated its Swedish operations to a new facility located at Hägersten, South of Stockholm.
Originally established at Gnesta
Littelfuse, Inc. announced the first high-voltage optically-isolated MOSFET gate driver on the market that requires no external power supply, yet can provide fast load turn-on speeds in the order of tens of microseconds.
The CPC1596 570V Optically Isolated Load-Biased Gate Driver is ideal for use in a wide range of power electronics applications including:
Industrial controls,
Automatic Test Equipment (ATE),
HVAC controls,
Medical devices,
Intern
The Japanese company took that opportunity to host a press conference to explain the reasons for the acquisition further and to launch 39 of the company’s Winning Combinations to demonstrate how the Dialog portfolio meshes with Renasas products to allow Rensas to compete in new areas and applications. The fi
Ngee Hou Tan, Senior Product Marketing Manager, and Thomas Beer, Senior Director Strategic System Application Engineering CoolGaN™, Power & Sensor Systems division, Infineon Technologies
Introduction
Today’s switch-mode power supplies (SMPS) are smaller, more efficient, and lower-cost than ever. The key to their performance is the power switch technologies at their heart – but how should designers choose the right material for this and find the best component to meet their needs?
While silicon is the most widely-known constituent of semiconductors, a new group of wide bandgap (WBG) materials is increasingly finding its way into applications. One example is gallium nitride (
