Transparent, prominent, on the pulse of time: For the first time ever, this year's productronica will depict the sectors for PCB manufacturing and electronics manufacturing services (EMS) in the new PCB & EMS cluster in Hall B1. The world's leading trade fair invites visitors and exhibitors to gather information and
TDK announced the introduction of the PXC-M series of 3W, 6W and 10W DC-DC converters. Packaged in the industry-standard DIP-24 footprint, the medically-certified units can operate over a wide 4:1 input range. With 5,000Vac input to output isolation, these efficient converters are suitable for use in a broad sp
As modern power converters move towards higher efficiencies, it is essential to have better models for all of the loss mechanisms in your components. We have talked about winding loss effects in several articles. Magnetics core loss modeling is an area that needs improvement.
Magnetics B-H Loops
As freq
When I started working with eGaN FETs almost six years ago, I had no idea what to expect from this technology. We had our first preliminary datasheet and even though I had no idea what to expect, it was obvious that, on paper, these devices were much better than your typical MOSFETs – already beyond the theoretical si
Today’s industrial applications demand power supplies capable of delivering ever-higher levels of power density. That trend is escalating as regulatory agencies around the world impose new regulations to achieve higher efficiency, not only at full load, but also in standby mode and across the entire load spectrum. To
Björn Rentemeister and Uwe Jansen, Infineon Technologies
The “Energiewende” (energy transition) has resulted in a shift in thinking not only about the generation of electrical energy, but its distribution and consumption as well. Efficient approaches are needed for energy production and transfer on the one hand, and consumption on the other. What plays a role he
Many applications in industrial, instrumentation, optical communication and healthcare industry use multi-channel data acquisition systems that result in increased printed circuit board (PCB) density and thermal power dissipation challenges. The need for increased channel density in these applications is
Lead-acid batteries are widely used in a broad range of industries and applications. The telecom industry uses a series stack of four lead-acid batteries to provide a 48V stack. Energy storage solutions (ESS) use lead-acid batteries in a variety of series and parallel configurations to store energy generated by
Mouser Electronics is now stocking the MAX32620/MAX32621 microcontrollers from Maxim Integrated. The MAX3262x devices are based on the 32-bit RISC ARM Cortex-M4F microcontroller with a floating point unit (FPU), ideally suited for the emerging category of medical and fitness applications. Both devices include 2MB
Artesyn Embedded Technologies announced the ConfigPro online power supply configurator to help customers find the optimal solution from the three million plus combinations enabled by its range of configurable power supplies. The ConfigPro tool will make it easier for industrial and medical equipment designers to
SUNY Polytechnic Institute’s Colleges of Nanoscale Science and Engineering (SUNY Poly CNSE) and Inficon, Inc. (INFICON) today announced plans for a joint research and development alliance on advanced semiconductor manufacturing technology. The 2-year R&D agreement will leverage SUNY Poly CNSE’s globally re
Dialog Semiconductor and Atmel Corporation announced that Dialog has agreed to acquire Atmel in a cash and stock transaction for total consideration of approximately $4.6 billion. The acquisition creates a leader in both Power Management and Embedded Processing solutions. The transaction results in a fast growing an
Energy is often defined as the amount of power consumed over time, measured in joules (J) or kilowatt-hours (kWh), whereas power is a constant rate of energy usage, measured in watts (W). Thus, while a power rating is typically used to indicate how much electricity a device will consume at a snapshot in ti
The printed electronics equipment and consumables supplier base consists of over 100 global organizations, according to IDTechex Research in their report "Printing Equipment for Printed Electronics 2015-2025". The majority of these are based in Europe, followed by a roughly even share of US and Asian ba
The power module market has seen explosive growth in the past few years. With growth rates of roughly 30% compounded annually, it’s a trend that many people are watching. Power modules are a new breed of products in the market that are LGA or QFN based, closed frame power supplies that include the controller, dr
The call for papers for PCIM Asia, an important application-oriented conference for power electronics in China, is online. Take your chance and present your solutions and know-how at this international event. At this conference you will meet a high-quality international audience interested in your developments an
Intersil, a leading provider of innovative power management and precision analog solutions, announced the acquisition of Great Wall Semiconductor (GWS), a private technology company developing state-of-the-art power metal-oxide semiconductor field-effect transistor (MOSFET) technology for cloud computing, space an
RS Components (RS), the trading brand of Electrocomponents, a distributor for engineers, announced the launch of DesignSpark Electrical, which brings the benefits of design software to all those not already using electrical CAD tools. The new software targets electrical design engineers and other electrical pr
AVX, a leading manufacturer of passive components and interconnect solutions, has introduced the T4J Medical Series tantalum SMD capacitors. Specifically designed for use in implantable, non-life-support and non-implantable life support medical applications, T4J Medical Series capacitors exhibit high standard re
The Internet of Things (IoT) represents a class of devices referred to as edge nodes; these require a battery life ranging from weeks to months to decades. An edge node typically contains a microcontroller to perform processing (e.g. encryption, compression, error correction, protocol stack), in addition to a
Modern power converters are moving towards high efficiency, high density, and high switching frequencies. Vendors of power supplies are doing an outstanding job of meeting these goals with a range of new technologies. At the same time, despite the use of advanced control chip technology, many control loops have su
