Click image to enlarge: Avago Technologies specifies the ACPL-M49U, -K49U, -M71U, and -M72U optocouplers over the extended temperature range of -40 to +125°C.
Click image to enlarge: The new C5183 PSS controller enables a new generation of lower cost, high performance USB chargers for rapid charging of smartphones with extended battery lives, media tablets, and other universal-input applications rated above 8 W.
Click image to enlarge
Click image to enlarge: The HBT socket for test applications has a cycle life of 500,000 insertions and is rated for bandwidths up to 31.5 GHz.
Click image to enlarge: The SKYPER 42 LJ dual-channel driver reliably controls IGBT modules up to 1,000 A with a maximum switching frequency of 100 kHz.
Click image to enlarge: Tecate Group's UL-recognized and IEC 60384-1 compliant AC safety capacitors for X and Y class applications include MLCC and radial-box form factors.
Click image to enlarge: XTR1N0400- and 0800-series high-temperature diodes include four independent well-matched devices in a single package.
Click image to enlarge: The 256-channel ADAS1256 digital X-ray AFE integrates the charge-to-digital conversion signal chain, integrating low-noise charge amplifiers, correlated double samplers, and 16-bit ADCs.
Click image to enlarge: Four omnipolar Hall-effect switches from Diodes Incorporated offer sensitivities to match magnetic field strengths in proximity- and position-detection applications and typically consume just 24 μW with a 3-V supply.
Click image to enlarge:
LEM's HLSR series Hall-effect current sensors measure AC, DC, or pulsed currents with nominal values of 10, 20, 32, 40, or 50 A RMS. The devices achieve a response time of only 2.5 μsec and operate over a temperature range of ?40 to 105 °C.
Click image to enlarge: Mitsubishi Electric's 6th-generation MPD IGBT modules include the CM900DUC-24S (1.2 kV, 900 A), CM1400DUC-24S (1.2 kV, 1.4 kA), and CM1000DUC-34SA (1.7 kV, 1 kA).
ECP60
Click image to enlarge: IGBTs based on Toshiba's new 6th generation process exhibit lower VCE(sat) conduction losses and reduced EON and EOFF switching losses.
Click image to enlarge: Depending on the type, the PPM60 module delivers an output voltage of 5, 9, 12, 15, 24, or 48 V DC.
Click image to enlarge: Atmel has announced the ATA664151 and ATA664251 LIN family for automotive switch-scan applications and in-vehicle ambient-lighting control.
Click image to enlarge: While the application waits for events, the BL600-series surface-mount module is in very low power mode consuming less than 10 μA. The module features an integrated antenna or option for external antenna, and provides a 95-dB link budget.
Click image to enlarge: CUI's NDM2Z-series modules, available in 12-, 25-, and 50-A versions, are pin and function compatible with the 3E POL BMR46X series from Ericsson Power Modules
MCU for wireless board
Gen 8 1200V IGBT
Click image to enlarge: SD-series Schottky-barrier rectifier diodes are available in a range of voltages, spanning 20 to 200 V with current ratings from 0.1 to 8 A.
Click image to enlarge: The MIC4414 and MIC4415 low-side N-channel MOSFET drivers can sink and source peak currents up to 1.5 A and can switch 1000-pF loads in 12 ns.
Click image to enlarge: The ULS series includes three single-output models providing output of 3.3, 5, or 12 V DC outputs from 36- to 75-V inputs.
Click image to enlarge: The MA8000 Series includes five new modules with heat-flux densities ranging from 16 to 22 W/cm2.
Click image to enlarge: The LCM300 has a power density of 6.86 W/in3 and will be available with 12-, 15-, 24-, 36-, and 48-V outputs trimmable to ±20%.
Click image to enlarge: The Excelsys XF-series high reliability, ruggedised AC-DC power supply
Figure 1: Unit shipments ï½ Wireless power transmitters and Receivers. Unit growth profile ï½ 2011 to 2021 (m). Source: IMS Research, August 2012
(Click image to enlarge)
Click image to enlarge: JTAGjet-Trace can perform trace acquisition of up to 200 MHz trace clock with a trace-buffer capture capacity of up to 18 MB.
Click image to enlarge: Wide range power monitor with onboard ADC, I2C, and shunt regulator
Click image to enlarge
Click image to enlarge: The STPTIC adjusts capacitance smoothly, without steps.
Click image to enlarge: Si7005 digital relative-humidity and temperature SoC block diagram
Click image to enlarge: The new AL and AS series RF inductors span an inductance range from 1.65 to 538 nH and provide current handling from 1.6 to 4.4 A.
Click image to enlarge: HFE1600-32 AC-DC power supplies can operate individually or up to five units can mount into a dedicated 1U rack delivering 8 kW.
Click image to enlarge: Ericsson's Digital Power Designer software is free of charge and can reduce time-to-market, total cost of ownership, and energy consumption.
Click image to enlarge: VPRC series connectors employ ITT's proven Trident contact system and are available in 3-, 6-, or 12-contact layouts.
Click image to enlarge: Adaptive Speed Range from Konecranes automatically varies the speed of the hoist according to the load.
Click image to enlarge: The MVAC250 and the MVAC400 comply with the UL60601-1 3rd-edition medical safety standard, the IEC60950/UL60950 safety specifications, and EN55022 standard for conducted emissions.
Click image to enlarge: Precision, high-voltage multicell battery-stack monitor with high noise immunity, isolated, bidirectional SPI communications up to 100 m
Incorporates both clinical TENS theories to provide pain relief .
Wolverine-MSP430
Click to enter interactive catalogue
