Richardson Electronics, Ltd. announced the availability of StarPower’s new X-Series 1700V IGBT modules.
The new X-Series features ultra-low conduction losses as well as short circuit ruggedness, strengthening StarPower’s offerings as a leading and independent manufacturer of power modules. This new
The interface has been developed so longer, moving cable runs for machines and machine modules are easier to install and maintain.
The Han-Modular Flexbox makes it possible to sub-divide energy chains into flexibly manageable and easily replaceable segments. The modular housing concept replaces the previou
It offers high definition audio at boom box power levels in a small form factor. The Infineon proprietary multilevel technology ensures minimum size and consumption, state of the art power efficiency, and HD audio quality for Raspberry Pi users and makers. Target field of use are active speakers with wireless m
Its centre comprises a motherboard with interchangeable drive cards.
The drive options include a Miller clamp and a bipolar supply card; additional variants will be launched in the near future. In shortening time-to market for a variety of applications, this portfolio will help paving the way for silicon car
In response to the growing demand for higher levels of reliability, safety, and increased flexibility for the LED’s thermal management in combination with an ultra-compact design, ROHM developed the industry-leading Automotive LED Driver BD18336NUF-M.
“ROHM is embracing the market trend towards miniaturization with its new
Thanks to their iron powder cores, the high-current inductors for audio applications (available in 1008 and 1213 packages) display stable behaviour at high peak currents.
The WE-LHMD features the 2-in-1 design from non-coupled inductors and is therefore suitable for compact BTL (Bridge-Tied Load) applications.
The high current inductor is characterized by low core losses, very low DC resistances from 2.5 mΩ to 14.8 mΩ and high saturation currents.
WE-HIDA is not only available as a single inductor, but also in 2-in-1 designs (package sizes 1415 and 1521) for compact BTL (Bridge-Tied-Load) applications.
A driver, MCD4609, and a pair of MCM4609 current multiplier modules supply up to 650A continuous and 1,200A peak. Owing to their small footprint and low profile (45.7mm x 8.6mm x 3.2mm), current multipliers are placed close to the processor enabling reduced power distribution network (PDN) losses and higher pow
The TPD7106F and TPD7107F can be used to control the conduction and shut-off of currents being supplied to automotive electronic control units (ECUs), including junction boxes and body control modules. They are also suited to use in power distribution modules and semiconductor relays.
When combined with
Full-scale, third party tests on ABB Power Grids’ Hybrid high-voltage direct current (HVDC) breaker, carried out in the KEMA Laboratories (Netherlands) in front of attending European TSOs and grid developers, successfully proved the maturity of the technology. This development is significant in shaping the future
In recent years, the proliferation of next-generation electric vehicles (xEVs) has been accelerating the development of smaller, lighter, and more efficient electrical systems. In particular, improving efficiency while decreasing the size of the main inverter that plays a central role in the drive system remains a
CGD leads the European funded GANEXT project under the PENTA Programme, targeting the design and development on highly efficient, highly compact prototypes of next generation Gallium Nitride power modules, for low and high power applications. The GaNext Penta project is undertaken by a powerful consortium with co
As robotic fleets reshape logistic, delivery and inspection industries, the demand for more efficient and flexible charging solutions is increasing while the feasibility for these fleets to be managed manually and recharged ad hoc by a 24/7 rotation of personnel is decreasing. The next step is toward enhanced au
In 174 pages, the "Coax Connectors" English language catalog presents nine product groups. The new product families of SMB and SMP connectors is the highlight.
The following product families are featured in the coaxial catalog available today: SMA and Reverse Polarity SMA, MCX and MMCX, SMP and SMB Mor
The rectifiers combine the high efficiency of their Schottky counterparts with the thermal stability of fast recovery diodes.
Targeting automotive, communications infrastructure and server markets, the new 1-3 A SiGe rectifiers are of particular benefit in high-temperature applications like LED lighting, engine co
With its rated power supply voltage (VBB) of 600V, the TPD4162F can be used for any applications with input signals in the range 200 to 220VAC.
The new IC contains a PWM circuit, 3-phase decoder, level shifting high-side driver and low side driver with embedded IGBTs and FRDs. This allows direct drive of brushle
The new device allows manufacturers and industrial operators to achieve greater control system flexibility while reducing their own product complexities. Traditional control systems require costly and labour-intensive manual configuration, with a complex array of channel modules, analogue and digital signal converte
The output voltage of these step-up and step-down converters can be adjusted from 9.6 to 48V and accept a wide range input voltage of 9 to 53V. The converters seamlessly transition from buck to boost mode operation without disruption in performance.
The i7C 8A series can be used to derive additional high-power outputs
The device meets the need for voltage regulation in noise-sensitive, battery-operated devices such as wearables, portables, and connected sensors.
The AP7353 is available in X1-WLB0707-4 (Type A1) and X2-DFN1010-4 (Type B) packages, each measuring less than 1mm on each side. These dimensions result in a sma
Having added 650 V to the portfolio earlier this year, the company is now launching the 1700 V class with its proprietary trench semiconductor technology. Maximizing the strong physical characteristics of silicon carbide (SiC), this ensures that the new 1700 V surface-mounted devices (SMD) offer superior reliabi
Decentralisation of system components has proven to be an important factor in modern system planning as it simplifies installation, enables expansion and reformatting of systems, and simplifies maintenance. In addition, conventional control cabinets can be replaced by smaller versions or even removed completel
Renesas Electronics Corporation introduced the magnet-free IPS2200 inductive position sensor. Featuring high accuracy and speed, total stray field immunity, and efficient motor integration in a thin and lightweight form factor, the IPS2200 is ideal for use as an absolute position sensor in a wide rang
Dialog Semiconductor plc announced the SLG47105, its first motor drive CMIC that delivers the unique benefits of both configurable logic and configurable analog with high-voltage outputs, all encapsulated within a tiny 2 x 3 mm QFN package.
The SLG47105 joins Dialog’s widely adopted GreenPAK product family an
Standing out from the Crowd! A deeper look into GaN & SiC products
Hosted by Power Systems Design, featuring Cree, Power Integrations, United SiC, Analog Devices, and Infineon
Now wide bandgap materials are established in the marketplace and being deployed in many applications, manufacturers are looking for ways
ADLINK Technology has launched the ROScube-I with Intel, providing a real-time ROS 2 robot controller for advanced robotic applications. The ADLINK ROScube-I Series is a ROS 2-enabled robotic controller based on Intel Xeon E, 9th Gen Intel Core i7/i3 and 8th Gen Intel Core i5 processors, and features exceptional I/O
Crowded application boards leave little space for high performance DC-to-DC POL converters. Furthermore, electromagnetic interference (EMI) is a significant concern at high component densities, limiting the field of acceptable power solutions. The LTM8074 µModule regulator easily meets these limiting factors. It
David Birks, Applications Engineer, Diodes Incorporated
Recent years have seen growing adoption of brushless DC motors. They are smoother and more efficient than brushed motors and have lower maintenance demands and higher torque-to-power ratios.
On the other hand, brushless motors are also more expensive and require more complicated drive circuitry. This article e
