The new modules are intended for use in e-mobility tailored for lower switching losses or for higher power.
The company is also introducing a module based on a lightweight AlSiC flat baseplate that meets the demand for natural convection or forced cooling in aerospace and in dedicated industrial applications
The easy-to-use tool offers the most common switching regulator and interface topologies - for example buck converters, CAN or Ethernet interfaces - and an overview of which components are required for them. From here, there is a direct link to ordering free component samples.
With the help of clear and delibera
The new family offers significant performance advantages over previous technologies and competitive devices. With RDS(on) performance down to 35 mΩ (typical), the new power GaN FETs target single phase AC/DC and DC/DC industrial switched mode power supplies (SMPS), ranging from 2 kW to 10 kW, especially server and
This new phase in the relationship between the two companies will result in a substantial increase in the breadth and volume of ST products stocked by RS. ST will also feature regularly on the award-winning DesignSpark online engineering hub.
“RS has been very successful in building up a vibrant internatio
Mouser continues to focus on the breadth of its product offering, with new manufacturers in product categories such as embedded, connectors, optoelectronics, semiconductors, and hardware. Among the new manufacturers, over half are in the embedded space, as Mouser continues to expand its Internet of Things (IoT)
These new surface mount components are capable of supporting both horizontal and vertical connection orientations, but come in smaller size formats than were previously available. The S1961-46R has a 3.55mm height, while the S1971-46R has a height of 4.55mm.
Although there are a multitude of vertical-only spri
Both families now offer variants with superior reinforced isolation for higher application safety and long operating life. The new family members are VDE 0884-11 certified. With 8 mm wide-body packages, both families are suitable for applications with demanding isolation requirements including industrial drives, solar
RS Components has announced the expansion of its popular RS PRO sensors range to give customers a comprehensive choice of sensors for use in factory automation applications. The range consists of high-quality sensors and accessories that deliver excellent reliability and great value.
Ultrasonic proximity senso
The inverter used only three discrete, low cost 35 mΩ SiC MOSFETs per switch location. This is expected to revolutionize EV and renewable energy designs.
Comments Bruce Renouard, Pre-Switch CEO: “We are shipping the CleanWave200 evaluation systems to initial customers around the world, and the efficienc
This ensures that they remain aligned with the latest standards and protocols. This means that customers have access to industry-leading solutions that support elevated data transfer rates and deliver superior levels of signal integrity.
Bulgin’s data connectivity suite includes the following key products:
By merging their proprietary code with Microchip’s fully functionable PD stack, designers have the ultimate flexibility for creating differentiated product offerings while choosing from a wide variety of Microchip SmartHubs, microcontrollers (MCUs) and standalone PD solutions for their USB systems.
The output voltage of these 24V nominal input step-down converters can be adjusted from 3.3V to 18V with a maximum current of 45A.
The i7A models can be used to derive additional high-power outputs from a 24Vdc power supply, at a lower cost and higher efficiency than isolated DC-DC converters. These very
With telecoms infrastructure shifting to 5G, the RFPA is becoming increasingly power-hungry, and RF Power Amplifier designers are moving from LDMOS to Gallium Nitride (GaN) Transistors. Overall, there’s a demand for highly efficient DC/DC converters, that can deliver the power required in a compact package. The BMR6
Following the recent releases of new products in this portfolio, the ICPT-1 and the IQRB-4, and an extensive update on the IQRB-1, IQD is now able to share new data on the IQRB-3.
The IQRB-3 can be synchronised to a 1 PPS signal as well as used as a 1 PPS source. Additionally, it offers superb phase noise perfo
These applications include phased array radars, electronic warfare, and ground-based SATCOM (satellite communications). The new digitizer includes four AD9081 or four AD9082 software-defined, direct RF sampling transceivers. It is designed to accelerate customer development by providing reference RF signal cha
R-TOOLS MAXX is a no charge, on-line simulation software that allows users to model the optimum air-cooled heat sink solution tailored to their project requirements. It is completely interactive and available online 24/7.
Users can enter the boundary conditions, heat source details, and choice of flow boundaries f
The new supplies require no external circuitry for operation or EMC compliance. Models in the new ASB75 series offer compact, fanless power with baseplate cooling for applications such as information technology equipment (ITE), Internet of things (IoT), general industrial and harsh or rugged applications.
Pre-Switch, Inc., has published performance data that shows that its 200kW (space vector modulated) CleanWave200 evaluation inverter exceeds 99.3% at 100kHz using only three discrete, low cost 35 mΩ SiC MOSFETs per switch location. This is expected to revolutionize EV and renewable energy designs.
TDK Corporation has extended its range of EPCOS ERU-SMT power inductors with the new ERU19, ERU24 and ERU27 (B82559*) series. Each product line is comprised of up to 10 types, covering inductance values from 1.0 µH to 30 µH. Overall, a range of saturation currents at 25 °C from 11.5 A DC to 101.5 A DC is co
As of 2020, Texas had a grid-connected photovoltaic capacity of nearly 8,000 megawatts, and just recently, Rosendin’s Renewable Energy Group (REG) began constructing the largest solar power project in the state.
This combination delivers greater than 98% full-load efficiency in PC, TV, and similar applications between 75 W and 400 W.
Comments Power Integrations’ product marketing manager Edward Ong: “Designs using HiperPFS-4 ICs show very high efficiency across the load range with as little as 36 mW of no-load p
This series comes in a compact SIP-3 open frame package and complements our existing POL portfolio with a series focusing strongly on a cost efficient design while maintaining our quality standards. There are 3 output voltages available: 3.3, 5.0 and 12VDC. The effective design allows full load operation up to +85°C a
The unique interactions between perovskite oxide, its changing surface layer, and iron species that are active toward the OER paves a new path for the design of active and stable materials, bringing us one step closer to efficient and affordable green hydrogen production.
A clean energy future propelled by hydrogen fuel depends on figuring out how to reliably and efficiently split water. That's because, even though hydrogen is abundant, it must be derived from another substance that contains it -- and today, that substance is often methane gas. Scientists are seeking ways to iso
Residential solar has one major problem – most of the energy generated by these systems is lost or transferred to the grid, with little benefit to the homeowner. So how do we solve this major inefficiency?
The Applied Power Electronics Conference announces that APEC 2021 will be presented as a virtual event and will take place June 14-17, 2021, on the virtual event platform, Social27. The virtual format will not only ensure the safety of our community, it will also allow:
· More of our global community of power
Timur Uludag, Senior Technical Marketing Manager MagI³C Power Modules Würth Elektronik eiSos
Space constrained applications like portable devices require especially designed DC/DC converters with a certain set of characteristics. Tight space, by definition, requires tiny DC/DC converters which have excellent thermal performance. This article digs deeper into the challenges that arise for the power supply of s