White Goods

September 2020
Shielded flat-wire coil
This coil is designed for high-efficiency DC/DC converters in automotive applications. The characteristic features of this flat-wire coil with its MnZn core are its high rated current (IR 38-47 A) and a high saturation performance. At an RDC value of 0.6 to 1.1 Ω, its resistance is lower than that of comparable c
. . . Learn More
Date:
09/27/2020
Sensing and balancing IC for automotive battery management
The device is especially designed for batteries in hybrid and electric cars, but it is also suitable for other applications. It measures the voltage in up to twelve battery cells with an accuracy of ± 5.8 mV over the entire temperature and voltage range as well as the operating life cycle. Furthermore, it supports
. . . Learn More
Date:
09/27/2020
Advanced H2S protection of IGBT modules enhances lifetime
Harsh environments with critical levels of H2S can be found especially in paper production, mining, wastewater and petrochemical processing as well as in the rubber industry.H2S is the most critical corrosive contaminant for power semiconductors. During operation, IGBT modules are usually heated up to high temperature l
. . . Learn More
Date:
09/27/2020
CoolSiC 62 mm module opens up new SiC applications
The proven 62 mm device has been designed in half-bridge topology and is based on the trench chip technology. It opens up silicon carbide for applications in the medium power range starting at 250 kW – where silicon reaches the limits of power density with IGBT technology. Compared to a 62 mm IGBT module, the
. . . Learn More
Date:
09/27/2020
Low Voltage Automotive Buck Converter with Programmable PFM/PWM
With a fully integrated 110mΩ high-side power MOSFET and 80mΩ low-side power MOSFET, it provides high-efficiency step-down DC-DC conversion from 5V and 3.3V input rails. The converter has been developed for use in automotive applications including infotainment systems, instrumentation clusters, telematics, a
. . . Learn More
Date:
09/27/2020
New silicon carbide power module for electric vehicles
In the past ten years, Infineon has sold more than 50 million EasyPACK modules with different chipsets for a wide range of industrial and automotive applications. At the same time, the semiconductor manufacturer has successfully established its extensive portfolio of CoolSiC products in industrial applications.
. . . Learn More
Date:
09/27/2020
LinkSwitch-TN2 High-Voltage Switcher ICs for Automotive Use
Featuring an integrated 750 V MOSFET, the new automotive-qualified LinkSwitch-TN2 IC provides simple and reliable power for EV sub-systems connected to the high-voltage bus, including HVAC, climate control, battery management, battery heater, DC-DC converter and on-board charger systems. The surface-mount devi
. . . Learn More
Date:
09/27/2020
High-Speed Op Amp Eliminates Oscillation from Load Capacitances
The device targets applications such as anomaly detection systems used in measurement and control equipment along with sensors that work with very small signals. The proliferation of IoT in recent years has led to a significant increase in the number of electronic components used for advanced control in a v
. . . Learn More
Date:
09/27/2020
1U 1kW programmable DC power supplies
These new products further expand the TDK-Lambda GENESYS+ series, offering up to 1,000W output power in a choice of full or half-rack package sizes. The GENESYS+ series is ideally suited for bench-top or rack-mount equipment in a wide variety of OEM, industrial and laboratory applications. Ten models are avai
. . . Learn More
Date:
09/27/2020
AEC-Q200-certified SMD ferrites with peak current load ratings
The respective peak-current capability of the ferrite beads is exactly specified. They are characterized by a high rated current of up to 10 A and extremely low resistances. WE-MPSA ferrite beads are available in the construction sizes 0805, 1206, 1612, 1812, 2220, and 3312 and can also in some cases be supplied
. . . Learn More
Date:
09/27/2020
Motor System ICs for control of small electric motors in cars
These ICs are the world's first multiple half-bridge drivers for MOSFETs with integrated power supply and communication interfaces. "With our highly integrated Motor System ICs, system designers only need half the board space compared to existing solutions. At the same time, system designers maintain the c
. . . Learn More
Date:
09/27/2020
New Ranges of Film Capacitors for Green Energy and Automotive
Constructed with an aluminum canister design, both the C44U-M and C44P-R power film series address the increasing demand for high-power conversion systems in green energy and industrial applications. These capacitors also support power conversion in en-ergy storage systems, IGBT and wide bandgap (WBG) semiconduct
. . . Learn More
Date:
09/27/2020
ROHM and LEADRIVE Establish Joint Laboratory
SiC power devices have been adopted increasingly in onboard vehicle chargers and DC/DC converters. These devices provide several advantages compared to silicon-based power devices such as IGBTs. One key benefit: significantly lower losses during both switching and conduction along with being able to operate at hi
. . . Learn More
Date:
09/27/2020
SIGA Broadens Wound Components Capability
The move follows SIGA’s acquisition of the business and assets in February of Wolverhampton-based Stabilised Transformers Limited. Their current transformer capability includes open or enclosed types of dry transformers and inductors, and extends through double wound and auto wound components, toroidal wound
. . . Learn More
Date:
09/27/2020
Würth Elektronik extends its WE-CBA product family
The SMDs are AEC-Q200 qualified as part of Würth Elektronik's automotive electronics portfolio. WE-CBA features high-quality Ni-Sn electrodes, a very high current carrying capacity up to 6 A, and operating temperatures from -55 to +125ºC. The ferrites, which are available in various specifications, are ideally
. . . Learn More
Date:
09/27/2020
Power transformer maker relies on Yokogawa power analyzer
Founded in 1959, SEA supplies high-value assets which are expected to provide a return over decades. Quality, durability, safety and reliable performance are therefore key characteristics that customers are looking for when they specify a new transformer or reactor. Transformers play a crucial role in the transmission
. . . Learn More
Date:
09/27/2020
Small, low-power 3D magnetic sensor opens up new designs
With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor opens up new design options. Due to the small WLB-5 package (1.13 mm x 0.93 mm x 0.59 mm) and its low current consumption of 7 nA in power-down mode, the new magnetic sensor is also suitable for use
. . . Learn More
Date:
09/27/2020
Upgrade to DesignSpark Mechanical 3D CAD modelling software
Version 5.0 offers new features, enhancements and customisation options that have been developed following feedback from users. The new release coincides with the 10-year anniversary of DesignSpark. Developed in conjunction with Ansys Inc., the leading provider of flexible and affordable 3D modelling software
. . . Learn More
Date:
09/27/2020
Silicon power transistors with wide bandgap-like performance
The claim is made by developer Search For The Next (SFN). The first devices to use Bizen are members of the QJT (Quantum Junction Transistor) family which will include three parts rated at 1200V/75A, 900V/75A and 650V/32A, available in the industry-standard TO247 or TO263 power MOSFET packages. Of extreme signif
. . . Learn More
Date:
09/22/2020
Low-cost DC-DC converter ranges
They all focus on a simple and effective design approach which is unique to those Traco Power Products. By innovative engineering we have come up with an electrical design which minimizes component and labor costs. Key focus of those designs was to maximize the amount of automatization of the manufacturing process.
. . . Learn More
Date:
09/07/2020
What are the advantages of SiC-based designs and how can you implement them?

Click image to enlarge

Figure 1 Technology positioning – Si, SiC and GaN

The global trends - such as digitalization and energy efficiency - that have emerged and accelerated in the past few years pose new challenges to the manufacturers as well as the semiconductor market. Developing power semiconductor devices that contribute to highly efficient power management systems is on the ag
. . . Learn More
Date:
09/03/2020
C&K Develops Sealed Subminiature Snap-acting Switch
C&K has launched a silent, sealed, subminiature, snap-acting switch series that offers precise actuation in automotive applications. The compact ZMW Series snap-acting switch combines a long stroke with more than 2mm of over travel for reliable actuation. The ZMW Series is used in rugged environments includin
. . . Learn More
Date:
09/02/2020

 


-->